Products

SZ 115 is a reactive amine additive used in place of more fugitive amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When SZ 115 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. Recommended levels are from 5 to 10% based on total formulation, usually combined with 5% of benzophenone.

SU 580 is a di-functional aliphatic urethane acrylate oligomer. This product is characterized good flexibility, good toughness, excellent durability and non-yellowing properties.

SP 236is a chlorinated polyester acrylate oligomer with TMPTA developed for UV/EB cure coating applications good pigment wetting, excellent wet lithographic and good adhesion on metal and paper properties.

SU 550A is a tri-functional water soluble aliphatic urethane acrylate oligomer diluted with water developed for UV/EB cure coating applications requiring water soluble system, anti-fog and non-yellowing properties.

SU 542 is a difunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, good toughness and non-yellowing properties.

SU 710 is a difunctional aromatic urethane acrylate oligomer. This product is characterized good flexibility, abrasion resistance and good adhesion to various substrates in combination with a good solvent resistance.

SP 270is a carboxylated polyester acrylate oligomer developed for UV/EB cure coating applications requiring low viscosity, and excellent adhesion on metal properties.

SU 5030 is a hexa-functional aliphatic urethane acrylate oligomer with 31% butyl acetate developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, extreme fast cure response and non-yellowing properties.

SU 5260 is a tri-functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good abrasion resistance, good toughness, good stain resistance and non-yellowing properties.

SU 522B is a hexa-functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring fast curing, high gloss and non-yellowing properties.

SU 5347 is a difunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good flexibility, low viscosity and non-yellowing properties.

SE 140 is a difunctional epoxy acrylate oligomer with 30% GPTA. This product is characterized by its low odor, light color, low irritancy and fast cure response. SE 140 is particularly useful overprint varnishes.

SP 271 is a carboxylated polyester acrylate oligomer developed for UV/EB cure coating applications requiring low odor, and excellent adhesion on metal properties.

SU 560 is a trifunctional aliphatic urethane acrylate oligomer with PEG400DA. This product is characterized miscible with water, anti-fog and non-yellowing properties.

SU 564 is a trifunctional aliphatic urethane acrylate oligomer with 1,6-hexanediol diacrylate. This product is characterized good abrasion and stain resistance, fast cure and non-yellowing properties.

SU 5039 is a nona(9) functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring fast cure response, excellent hardness, very good abrasion resistance and non-yellowing properties.

SE 1656 is high functionality novolac epoxy acrylate oligomer with 50% TMPTA developed for UV/EB cure coating applications requiring excellent heat resistance, good hardness and good adhesion on metal properties.

SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate (HPMA), specifically designed for use in solder resist coatings on printed circuit boards and may be cured by ultraviolet light (UV) or electron beam (EB).

SU 512 is an aliphatic urethane diacrylate oligomer diluted with 15% of TPGDA monomer. Films of SU 512 cured by ultraviolet light (UV) or electron beam (EB) exhibit good abrasion resistance, flexibility, adhesion and exterior durability, as well as the non-yellowing properties typical of an aliphatic urethane.

SP 224 is a acid modified polyester acrylate oligomer with HDDA developed for UV/EB cure coating applications good adhesion on glass and plastics and good inter-coat adhesion properties.

SP 277 is a carboxylated polyester acrylate oligomer for alkali-strippable etch resist varnishes developed for UV/EB cure coating applications requiring low shrinkage, and excellent adhesion on metal properties.

SP 220 is a modified polyester resin diluted with 40% of tripropyleneglycol diacrylate (TPGDA). This resin is characterized by light color and high acid number. Films of SP 220 cured by ultraviolet light (UV) or electron beam (EB) are soft and flexible, with good adhesion to paper, plastics and metals, making this product especially suited for use in laminating adhesives.

SE 1703 is a amine modified of SE 1701. This products was developed specially for application where improved flexibility and exceptionally fast cure.

SU 7206 is a trifunctional aromatic urethane acrylate oligomer diluted with trimethylol-propane triacrylate developed for UV/EB cure coating applications requiring good flexibility, good solvent resistance, good abrasion and scratch resistance properties.

SU 530 is a difunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good flexibility, low viscosity and non-yellowing properties.

SU 5020is a hexa-functional aliphatic urethane acrylate oligomer with 26% butyl acetate developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, extreme fast cure response and non-yellowing properties.

SZ 9135 is a silicon acrylate, developed for UV/EB cure coating applications requiring for slip, wetting and good flow.

SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid. This product is characterized by its flow and leveling, and its outstanding pigment wetting qualities.

SU 720 is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of SU 720 exhibit high hardness and solvent resistance.

SP 300 is a self initiation prepolymer without photo-initiator. This product is characterized no residual odor after curing, non-yellowing, and liquid type for easy handling.

SU 520 is a deca(10)-functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good abrasion resistance, extreme fast cure response, high hardness and non-yellowing properties.

SE 1500 is a low viscosity version of SE 1701 epoxy acrylate oligomer. SE 1500 improves flexibility and toughness. This product is characterized by its fast cure response, excellent solvent resistance and high surface hardness.

SP 281N is a low viscosity amino modified multi-functional polyester acrylate oligomer developed for UV/EB cure coating applications requiring high gloss, fast curing and low viscosity properties.

SP 280 is a low viscosity multi-functional polyester acrylate oligomer developed for UV/EB cure coating applications requiring high gloss, good solvent resistance and good pigment wetting properties.