Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Characteristics
- Permanent color
- Paintable
- Mildew resistant
- UV resistant
- Non-yellowing
- Very good adhesion on many materials
- Very easy application
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Applications
- Building and construction joints
- Sealing around baseboards
- Sealing in sanitary rooms, kitchens, cold storage rooms and containers
- Sealing around trim
- Window and door joints
- Methodology
Surface
- Type: all usual building surfaces
- State of surface: clean, dry, free of dust and grease
- Preparation: No primer required for porous surfaces. The use of Soudal Surface Activator on smooth surfaces will improve the adhesion of Soudacryl C834.
We recommend a preliminary compatibility test, especially on PVD and non-porous materials.
Joint Size
Minimum width 1/4” Maximum width 1 3/16” Minimum Depth 1/5” Recommendation 2 x depth = width Application:
- Method: Manual or pneumatic caulking gun
- Conditions: 40° F to 95° F
- Finish: soapy water before skinning
- Repair With: Soudacryl C834
- Clean Up: with water immediately after use
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Application Temperature Range | 40 to 110 | °F | - |
Curing System | Moisture evaporation | - | - |
Movement Capability | Moderate joint movement | - | - |
Non-Volatile (Cleare to Color) | 61-81 | - | - |
Ph | 8.0 | - | - |
Sag (Vertical Displ.120ºF) | No sag | - | ASTM C 639 |
Service Temperature Range | -20 to +185 | °F | - |
Shrinkage | 28.0 | - | ASTM C 733-87 |
Skin Formation (75ºF, 50 Relative Humidity) | (+/-) 10 | minutes | - |
Tack-Free Time | max. 1 | hour | ASTM C 679 |
VOC | 28.0 | g/L | - |
Regulatory & Compliance
- Limited Warranty
SOUDAL warrants product to be of good quality and will replace or, at our election, refund the purchase price of any products proved to be defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, SOUDAL MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and SOUDAL shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith.
- Product Replacement Policy
After proper storage and application, if product fails within 50 years after installation, Soudal Accumetric, as its sole liability, will furnish replacement product or a refund with proof of purchase. This shall be Soudal Accumetric’s sole obligation with regard to this product and Soudal Accumetric shall not be liable for any damages, including incidental or consequential damages. This is the sole and exclusive remedy and liability for defects or failure of this product.
Safety & Health
- Health and Safety Recommendation
DIRECT CONTACT OF UNCURED SEALANT IRRITATES EYES AND MAY IRRITATE SKIN. OVEREXPOSURE TO VAPOR MAY IRRITATE EYES, NOSE AND THROAT. KEEP OUT OF REACH OF CHILDREN. Avoid skin and eye contact. On Contact, uncured sealant could cause irritation to skin and eyes. In case of eye contact, flush eyes with warm water for 15 minutes, call a physician. For skin contact, remove sealant with a paper towel. If swallowed, do not induce vomiting, call a physician. Soudacryl C834 is manufactured for professional use only.
Packaging & Availability
- Packaging Type
- Packaging
10.1 fl. oz. cartridges
Storage & Handling
- Shelf Life
- 12 months in unopened packaging in a cool and dry storage place at temperatures between +41° F and +110° F.
- Storage in excessive heat and/or high humidity conditions may reduce shelf life up to 30.
Remarks:
- Not recommended for continuous water immersion or vehicular or foot traffic.
- Allow a minimum of 2 hours dry time before painting with latex or oil base paint.