Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Characteristics
- excellent adhesion on porous and non porous substrates
- high performance mechanical properties
- permanent elastic after full cure
- self leveling
- no bubble formation within sealant even in high temperature and humidity applications
- color stable and UV resistant
- ecological advantages - free of isocyanates, solvents, halogens and acids
- minimal health and safety considerations
- can be painted with water based paints and many other systems (to be tested)
- good extrudability even at low temperatures
- excellent weather resistance in all climates can be used on damp or moist substrates
- primerless adhesion on many different substrates (except where water pressure may occur) almost odorless
- Direction for use
Substrates
- Surface Preparation: clean, dry, free of dust and grease, free of chipping paint.
- Priming: Porous surfaces in water loaded applications
- should be primed with Primer 150.
- Surface Activator may be used to pretreat non-porous surfaces.
- We recommend preliminary compatibility tests previous to application.
Resistance to chemical agents:
Good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis. Poor resistance to aromatic solvents, concentrated acids, chlorinated hydrocarbons.
Horizontal Joint dimensions:
- Minimum width: 1/4”
- Maximum width: 1 3/16”
- Minimum Depth: 1/5”
- Recommendation: 2 x depth = width
Applications
- Method: Manual- or pneumatic caulking gun. Application
- temperature: -35°F to +140°F. Cleaning: with IPA
- immediately after use and before curing. Repair with:
- Soudaseal SL.
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Applications
- sealing of horizontal joints in building and metal work industry.
- sealing of horizontal overlap joints between panels in automotive applications.
- Remarks
May be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc. may differ from manufacturer to manufacturer, we recommend preliminary compatibility tests. Bonding plastics like PMMA (ie Plexi® glass) and polycarbonate (ie Makrolon® or Lexan®) in stress loaded applications can give rise to stress cracking and crazing in these substrates. The use of Soudaseal SL is not recommended in these applications.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Application Temperature Range | -35 to +140 | °F | — |
Artificial Weathering | No Cracking | — | ASTM C 793 |
Base | Silyl-terminated polymer | — | — |
Curing System | Moisture Cure | — | — |
Curing Time (1/8” Diameter Bead, 75ºF & 50 relative humidity) | 24-28 | hrs | — |
Elongation | 350.0 | — | ASTM D 412 |
Hardness (+/- 5) | 30.0 | Shore A | ASTM C 661 |
Movement Capability | (+/- ) 25 | minutes | ASTM C 719 |
Sag (Type I, 120ºF) | Flowable sealant | — | ASTM C 639 |
Service Temperature Range | -40 to +200 | °F | — |
Skin Formation (75ºF, 50 Relative Humidity) | 15.0 | minutes | — |
Stain And Color Change | Passes | — | ASTM C 510 mortar |
Tack-Free Time | 60.0 | minutes | ASTM C 679 |
Tensile Yield | 225.0 | psi | ASTM D 412 |
VOC (2%) | 34.0 | g/L | EPA method 24 |
Regulatory & Compliance
- Approvals / Standards
ASTM C 920, Type S, Grade P, Class 25, Use T, NT, M, A, G and O, Federal Specification TT-S-00230C, Type II, Class A.
- Limited Warranty
SOUDAL warrants product to be of good quality and will replace or, at our election, refund the purchase price of any products proved to be defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, SOUDAL MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and SOUDAL shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith.
Safety & Health
- Health and Safety Recommendation
KEEP OUT OF REACH OF CHILDREN. Avoid skin and eye contact. On contact, uncured sealant could cause irritation to skin and eyes. In case of eye contact, flush eyes with warm water for 15 minutes, call a physician. For skin contact, remove sealant with a paper towel. If swallowed, do not induce vomiting, call a physician. SoudaSeal SL is manufactured for professional use only. Refer to Safety Data Sheet (SDS) for further information.
Packaging & Availability
- Packaging
29 fl. oz. pro pack.
Storage & Handling
- Shelf Life
12 months in unopened packaging in a cool and dry storage place at temperatures between 41°F and 77°F.