Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Characteristics
- Very easy application
- High temperature resistance
- Stays permanently elastic after curing
- Typical acetic smell
- Excellent UV resistance
- Not paintable
Applications & Uses
- Markets
- Cure Method
- Applications
- Creation of heat resistant gaskets
- Sealing between metal part
- Gaskets in pumps and motors
- Sealing in heating systems
- Sealing in kitchen machinery
- Methodology
Surfaces:
Type: all usual surfaces- State of surface: clean, dry, free of dust and grease
- Preparation: No primer required for non-porous surfaces.
- We recommend a preliminary compatibility test.
Application:
- Method: Caulking gun
- Conditions: 40° F to 95° F
- Finish: soapy water before skinning
- Repair With: Soudasil HT1
- Clean Up: white mineral spirit immediately after use
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Application Temperature Range | -35 to +140 | °F | — |
| Artificial Weathering | No Cracking | — | ASTM C 793 |
| Base | Polysiloxane | — | — |
| Curing System | Moisture Cure | — | — |
| Curing Time (1/8” Diameter Bead, 75ºF & 50 relative humidity) | 48.0 | hrs | — |
| Elongation | min. 350 | — | ASTM D 412 |
| Hardness (+/- 5) | 20.0 | Shore A | ASTM C 661 |
| Movement Capability | (+/- ) 25 | minutes | ASTM C 719 |
| Sag (Vertical Displ.120ºF) | No sag | — | ASTM C 639 |
| Service Temperature Range | -40 to +500 | °F | — |
| Skin Formation (75ºF, 50 Relative Humidity) | 6.0 - 7.0 | minutes | — |
| Stain And Color Change | Passes | — | ASTM C 510 mortar |
| Tack-Free Time | 25.0 | minutes | ASTM C 679 |
| Tensile Yield | 170.0 | psi | ASTM D 412 |
| VOC (3%) | 30.0 | g/L | — |
Regulatory & Compliance
- Certifications & Compliance
- Meets
ASTM C 920, Type S, Grade NS, Class 25, Use NT, A. Federal Specification TT-S-00230C, Type II, Class A. FDA Regulations 21 CFR Section 177.2600: "Rubber articles intended for repeated use”.
- Limited Warranty
SOUDAL warrants product to be of good quality and will replace or, at our election, refund the purchase price of any products proved to be defective. Satisfactory results depend not only upon quality products, but also upon many factors beyond our control. Therefore, except for such replacement or refund, SOUDAL MAKES NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and SOUDAL shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use and assume all risks and liability in connection therewith.
Safety & Health
- Health and Safety Recommendation
KEEP OUT OF REACH OF CHILDREN. Avoid skin and eye contact. On Contact, uncured sealant could cause irritation to skin and eyes. In case of eye contact, flush eyes with warm water for 15 minutes, call a physician. For skin contact, remove sealant with a paper towel. If swallowed, do not induce vomiting, call a physician. Soudasil HT1 is manufactured for professional use only.
Packaging & Availability
- Packaging Type
- Packaging
10.1 fl. oz. cartridges
Storage & Handling
- Shelf Life
12 months in unopened packaging in a cool and dry storage place at temperatures between +41° F and +77° F