Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Note
For food applications you will need to wash the cured mold with warm water and soap before using.
Addition cured silicone rubber may be inhibited by certain contaminants resulting in tackiness on the surface of the mold. Latex, sulfur based clays, tin cured silicone rubber, amines, nitriles, organo-metallic salt containing compounds should be avoided. If you are unsure of the compatibility of the substrate being molded a small test is recommended. To prevent inhibition it is usually helpful to coat the pattern with a clear acrylic lacquer or paint. Do not use polyurethane or latex.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Demold Time | 8.0 | hours | — |
| Elongation | 500.0 | % | — |
| Hardness | 20.0 | Shore A | — |
| Heat Deflection | min. 400 | °F | — |
| Mix Ratio (By Weight) | 1:1 | — | — |
| Tear Resistance | 160.0 | ppi | — |
| Tensile Strength | 580.0 | psi | — |
| Viscosity | 10,000 - 12,000 | cps | — |
| Working Time | 40.0 | minutes | — |
Regulatory & Compliance
- Certifications & Compliance