Knowde Enhanced TDS
Identification & Functionality
- INCI Name
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Industrial Additives Functions
- CAS No.
- 68439-57-6
- EC No.
- 270-407-8
- Product Families
- Preservative
Methylchloroisothiazolinone/Methylisothiazolinone
Features & Benefits
- Labeling Claims
- Biodegradability
Product is readily biodegradable.
Applications & Uses
- Applications
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Personal Hygiene Applications
- Skin Care Applications
- Applications
BIO-TERGE AS-40K is an aqueous solution of sodium olefin sulfonate which is produced by the continuous sulfonation of alpha olefins via Stepan's falling film process. Stepan's process minimizes the formation of disulfonates thereby offering a consistent high quality product. BIO-TERGE AS-40K is an ideal surfactant for a variety of detergent and personal care applications including hand soaps, shampoos, and bath products. It offers the formulator excellent viscosity and foam characteristics, as well as improved mildness over lauryl sulfates. It is more stable than alcohol sulfates over a broad pH range.
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
Value | Units | Test Method / Conditions | |
Boiling Point | min. 100 | °C | — |
Actives Content (MW 315) | 39.2 | % | — |
Cloud Point | 7 | °C | — |
Unsulfated Matter | 0.68 | % | — |
Critical Micelle Concentration (CMC) | 301 | mg/L | — |
Sodium Sulfate Content | 0.77 | % | — |
Density | 1.07 | g/ml | — |
pH (10% in aqueous solution) | 5.8 | — | — |
Color (in 5% active) | 40 | — | Klett Colorimeter |
Viscosity (at 25°C) | 151 | cPs | — |
Pour Point | -4 | °C | — |
Freeze Point | -7 | °C | — |
Sodium Chloride Content | 0.27 | % | — |
Flash Point | min. 94 | °C | PMCC Flash Point Tester |
Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
Specific Gravity (at 25°C) | 1.07 | — | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- All components of BIO-TERGE AS-40K are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: United States (TSCA 68439-57-6), Canada (DSL 68439-57-6), Australia (AICS 68439-57-6), Europe (EINECS 270-407-8), Korea (ECL Serial No. KE-32477), Philippines (PICCS 68439-57-6), and China (IECSC 68439-57-6). This product is approved for limited applications in Japan; please contact Technical Service for further details.
- BIO-TERGE AS-40K is USDA authorized.
Safety & Health
- Toxicity
BIO-TERGE AS-40K is slightly toxic orally (oral LD₅₀ = 1.3-2.4 g/kg) and causes moderate skin and eye irritation at 10% active.
Packaging & Availability
- Packaging Type
- Standard Packaging
BIO-TERGE AS-40K is available in bulk, 55 gallon drums and 275 gallon totes.
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e., the use of gloves and safety goggles) should be employed when handling BIO-TERGE AS-40K. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material. It is recommended that BIO-TERGE AS-40K be stored in sealed containers and kept at temperatures above 50 °F (10 °C). Avoid overheating or freezing. This material can gel and separate if exposed to cooler temperatures. Heat it slowly with mild agitation to insure its homogeneity before use.
- Bulk Storage Information: Tanks made of 316 stainless steel or fiberglass with Atlac 382 corrosion liner are recommended. Positive displacement gear pumps and piping should be 316 stainless steel. Recommended storage for bulk tanks is 80-100 °F (27-38 °C).