Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Cleaning Ingredients Functions
- CAS No.
- 9002-93-1
- EC No.
- 618-344-0
Features & Benefits
- HII Features
- Biodegradability
IGEPAL CA products are biodegradable.
Applications & Uses
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Applications
- IGEPAL CA 630 is used in all phases of detergent compounding and aqueous processing in the textile and paper industries. IGEPAL CA 630 is also used in industrial metal cleaners, acid cleaners, floor cleaners, detergent-sanitizers and waterless hand cleaners and is an effective emulsifier for more polar solvents such as xylene.
- IGEPAL CA products do not ionize in water, hence are nonionic and nonelectrolytic, and are not subject to hydrolysis by aqueous solutions of acid or alkali. They cannot form salts with metal ions and are equally effective in hard and soft waters. Their nonionic nature makes them useful with either anionic or cationic agents, and with positively or negatively charged colloids.
- The amount of ethylene oxide combined with octyl phenol determines the solubility of the IGEPAL CA product in water, oil, or organic solvent. Greater solubility in water and water-miscible solvents is found in the types which contain larger amounts of ethylene oxide. The IGEPAL CA products with lower amounts of ethylene oxide are soluble or dispersible in mineral oils and water-immiscible solvents. The types which are soluble in water dissolve to a crystal clear solution.
Properties
- Physical Form
- Appearance
- Pale yellow liquid (at 25°C)
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Actives Content | min. 99.5 | % | — |
| Cloud point (in 1% aqueous solution, at 25°C) | 63 - 67 | °C | — |
| Color | max. 100 | — | Apha Scale |
| HLB | 13 | — | — |
| Number of Moles of Ethylene Oxide | 9 | — | — |
| pH (in 5% aqueous) | 6.5 - 8.5 | — | — |
| Pour Point | 7 | °C | — |
| Ross Miles Foam Height (in 0.1% aqueous, at 25°C, initial) | 100 | mm | — |
| Specific Gravity | 1.03 - 1.05 | g/ml | — |
| Surface Tension (in 0.01% aqueous, at 25°C) | 31 | dynes/cm | — |
Regulatory & Compliance
- Chemical Inventories
- Clearances
This product is listed on the Canadian Domestic Substances List.
Safety & Health
- Toxicity
IGEPAL CA 630 is slightly toxic orally and minimally toxic to eyes at 5%. (LD₅₀ is 1610 mg/kg.)
Packaging & Availability
- Standard Packaging
IGEPAL CA 630 is available in bulk and 210 kilogram drums.
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling IGEPAL CA products. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling material.
- It is recommended that IGEPAL CA products be stored in sealed containers and kept in a cool dry place. Avoid contact with concentrated forms of oxidizing or reducing agents.
- Although IGEPAL CA 630 will solidify at low temperature, this change in physical form is reversible and does not affect performance. IGEPAL CA 630 is stable and can be used safely with acid, alkali, and dilute solutions of many oxidizing and reducing agents. These products will discolor when in contact with anhydrous caustic and metasilicate. Moderate quantities may be used with phosphates, carbonates, etc., without excessive color change.
- Bulk Storage Information: IGEPAL CA products can be stored in vessels of 304 or 316 stainless steel; carbon steel is also adequate. Material should be stored between 27 - 43°C. An internal hairpin coil of 304, 316 stainless or carbon steel with low pressure steam (under 50 psig) should be used if heating is required. Mild agitation is required if the tank is heated. Heating may not be required for inside storage if the tank is turned over frequently. Stainless steel is preferred for pumps, pipes and transfer lines; however, carbon steel is adequate.