Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- Technologies
- Product Families
- Surfactant Type
Nonionic.
Applications & Uses
- Markets
- Applications
MICRO-STEP H-303 is a specially formulated blend of nonionic surfactants for use as an emulsifier for many pesticide micro-emulsion formulations.
Properties
- Formulation Type
- Physical Form
- Appearance
- Pale yellow liquid
- Soluble in
- Water, Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25 °C) | 1.05 | g/ml | — |
| Moisture Content | max. 1 | % | — |
| pH (in 5% in 1:1 IPA/H2O) | 6 - 8 | — | — |
| Viscosity (at 25°C) | 740 | cPs | — |
| Flash Point | min. 94 | °C | — |
| Pour Point | 10 | °C | — |
| Regulated Volatile Organic Chemicals (Ethanol) | 0 | % | U.S. EPA |
Regulatory & Compliance
- Chemical Inventories
- Clearances
MICRO-STEP H-303 is approved for use as an inert ingredient under U.S. EPA 40 CFR 180.910/960. All components of MICRO-STEP H-303 are listed in the following countries: United States (TSCA), Australia (AICS), Canada (DSL), China (IECSC), Korea (ECL), New Zealand (NZIoC) and Philippines (PICCS).
Packaging & Availability
- Standard Packaging
MICRO-STEP H-303 is available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling MICRO-STEP H-303. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.
Bulk Storage Information
It is recommended that MICRO-STEP H-303 be stored in stainless steel and glass fiber-reinforced polyester tanks. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained for long periods of time without degradation of the product. MICRO-STEP H-303 which has been stored in drums at temperatures below 60°F (15°C) may thicken or solidify. It may be fluidized by warming with a drum heater or in a steam room. Drums should be vented during heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended.