Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- CAS No.
- 26264-06-2
- EC No.
- 247-557-8
- Technologies
- Product Families
- Surfactant Type
Anionic.
Features & Benefits
- Biodegradability
NINATE 70B is readily biodegradable.
Applications & Uses
- Markets
- Applications
NINATE 70B is an anionic surfactant that is used in combination with nonionic surfactants to form effective emulsifier systems for many pesticide emulsifiable concentrate formulations.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear to slightly hazy amber liquid
- Insoluble in
- Water
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25 °C) | 1.01 | g/ml | — |
| Moisture Content | max. 1 | % | — |
| pH (in 5 % in 1 :1 IPA :H2O) | 5.0 - 8.0 | — | — |
| Viscosity (at 25°C) | 10000 | cPs | — |
| Flash Point | 32 | °C | — |
| Pour Point | 7 | °C | — |
| Actives Content (MW 342) | 66 | % | — |
| Regulated Volatile Organic Chemicals (Ethanol) | 31 | % | U.S. EPA |
| Color | 13 | — | Gardener Scale |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of NINATE 70B are listed in the following countries; the registration number for the active ingredient is included in parentheses: United States (TSCA 68584-23-6), Europe (EINECS No. 271-529-4), Canada (DSL 68584-23-6), Korea (ECL Serial No. KE-02599), China (IECSC 68584-23-6), Philippines (PICCS 68584-23-6), and Australia (AICS 68584-23-6). NINATE 70 B is approved for use as an inert ingredient under U.S. EPA 40 CFR 180.920.
Safety & Health
- Toxicity
NINATE 70B is slightly toxic orally (LD50>1300 mg/kg) and it causes moderate skin and severe eye irritation.
Packaging & Availability
- Standard Packaging
Available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling NINATE 70B. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling materials. Use product in a well-ventilated area away from sparks and open flame.
Bulk Storage Information
Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained without degradation of the product. NINATE 70B that has been stored in drums at temperatures below 44°F (7°C) may thicken or solidify. Product may be fluidized by warming with a drum heater or in a steam room. Drums should be vented during heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended, as excessive solvent loss may occur. The flash point may be exceeded when warming to pump but the temperature should be below the flash point for storage. Keep away from open flames and provide ventilation.