Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- CAS No.
- 9004-82-4
- EC No.
- 618-398-5
- Technologies
- Chemical Formula
CH3(CH2)11O(CH2CH2O)12SO3Na
- Surfactant Type
Both anionic and nonionic.
Features & Benefits
- Industrial Additives Features
- Product Benefits
POLYSTEP B-23E is an ethoxylated lauryl ether sulfate containing 12 moles of ethylene oxide. POLYSTEP B-23E is a suitable APE alternative, offering the advantage of both anionic and non-ionic surfactant properties in emulsion polymerization.
- Biodegradability
POLYSTEP B-23E is biodegradable.
Applications & Uses
- Markets
- Applicable Processes
- Applications
POLYSTEP B-23E is a versatile surfactant:
- Used in the manufacture of styrene butadiene, styrene acrylic, all acrylic and vinyl acetate homopolymer and copolymer latexes.
- Aids in the incorporation of water-soluble monomers.
- Often confers good hydrophobicity to the dried polymer film.
- It is frequently used in conjunction with a non-ionic surfactant.
- Latexes made with POLYSTEP B-23E have good electrolyte stability.
Properties
- Physical Form
- Appearance
- Clear thin liquid
- Soluble in
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
pH (in 10% aqueous solution) | 7.5 | — | — |
Solids Content | 30 | % | — |
Sodium Sulphate Content | max. 1.6 | % | — |
Sodium Chloride Content | max. 0.8 | % | — |
Viscosity (at 25°C) | 60 | mPa.s | — |
Flash Point | min. 94 | °C | — |
Density (at 25°C) | 1.04 | g/cm | — |
Critical Micelle Concentration (CMC) | 131 | mg/L | — |
Surface Tension (at CMC) | 41 | mN/m | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of Polystep® B-23E are listed in the following countries (the registration numbers for the active ingredients are included in parentheses): Europe (EINECS-Polymer exempt), USA (TSCA 9004-82-4), Canada ( DSL 9004-82-4), Australia (AICS 9004-82-4), Korea (ECL Serial No. KE32427), Philippines (PICCS 9004-82-4), Japan (ENCS 7-155), China (EICS Part.3) and New Zealand (NZloC listed).
Packaging & Availability
- Standard Packaging
POLYSTEP B-23E is available in bulk, 200kg drums and 1000kg Intermediate Bulk Containers.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling POLYSTEP B-23E. Contact with the eyes and prolonged contact with the skin should be avoided. It is recommended that POLYSTEP B-23E be stored in sealed containers and kept in a cool, dry place. Avoid overheating or freezing. If material has been frozen, mild heat and agitation are recommended to ensure material is homogeneous before use.
Bulk Storage Information
POLYSTEP B-23E should be stored in 316L stainless steel or fiberglass with a corrosion liner. Mild agitation is recommended while storing to maintain homogeneity. Material should be stored between 15-30 °C. An internal hairpin coil of 316L stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Pumps, pipes and transfer lines should be 316L stainless steel.