Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- CAS No.
- 25446-78-0
- EC No.
- 246-985-2
- Technologies
- Chemical Formula
C13H27(OCH2CH2)nOSO3Na
Features & Benefits
- Biodegradability
Product is biodegradable.
Applications & Uses
- Markets
- Applicable Processes
- Applications
POLYSTEP B-40 is a mild branched chain alkyl ether sulfate. It can be used in a variety of latex systems. Stepan’s continuous sulfonation process produces highly consistent, high purity products which will afford excellent performance in emulsion polymer applications. This material shows potential as an alternate to APE containing surfactants.
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| pH (in 10% aqueous solution) | 8.3 | — | — |
| Actives Content (EW 434) | 30 | % | — |
| Color | 4 | — | Gardener Scale |
| Viscosity (at 0°C) | 2060 | cPs | — |
| Viscosity (at 25°C) | 700 | cPs | — |
| Viscosity (at 60°C) | 160 | cPs | — |
| Flash Point | min. 94 | °C | — |
| Density | 1.03 | g/ml | — |
| Critical Micelle Concentration (CMC) | 139 | mg/L | — |
| Surface Tension (at CMC) | 24 | dynes/cm | — |
| Regulated Volatile Organic Chemicals (Ethanol) | 0 | % | U.S. EPA |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
POLYSTEP B-40 is registered for use in Europe (EINECS 246-985-2), Japan (ENCS 2-1682), Canada (DSL 25446-78-0) and Australia (AICS 25446-78-0).
Packaging & Availability
- Standard Packaging
POLYSTEP B-40 is available in bulk and 55 gallon drums (net weight: 475 lb/215 kg).
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling Handling POLYSTEP B-40. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material. It is recommended that POLYSTEP B-40 be stored in sealed containers and kept in a cool, dry place. Polyethylene drums are recommended for storage of POLYSTEP B-40. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use.
Bulk Storage Information
POLYSTEP B-40 should be stored in 316 stainless steel or fiberglass with a corrosion liner. Mild agitation is recommended while storing to maintain homogeneity. Material should be stored between 90 - 125°F (32 - 52°C). Use mild heat if needed avoiding the use of steam since it may impact product integrity. Recirculated warm water is recommended. Pumps, pipes and transfer lines should be 316 stainless steel.