Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- Base Chemicals Functions
- CAS No.
- 52628-03-2
- EC No.
- 258-053-2
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Base Chemicals Features
- Biodegradability
The product is considered readily biodegradable.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Base Chemicals End Uses
- Applications
POLYSTEP HPE is a functional monomer for use in emulsion and solution polymerization systems. When incorporated into the polymer, POLYSTEP HPE promotes adhesion to substrates and corrosion resistance. POLYSTEP HPE can provide improved pigment dispersion and antistatic properties to polymers. Typical use levels of 1 – 4%.
Properties
- Physical Form
- Appearance
- Clear colorless to pale yellow liquid
- Typical Properties
Value Units Test Method / Conditions Acid Value 180 mg KOH/g - Phosphoric Acid Content max. 4.0 % - Viscosity (at 25°C) 900 cPs - pH (in 5% in water) max. 2 - - MEHQ (as added) 500 ppm - Water Content max. 0.25 % - Density (at 20°C) 1.26 g/ml -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of POLYSTEP HPE are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: Australia (AICS 52623-03-2), Canada (DSL 52628-03-2), China (IECSC 52628-03-2), Korea (ECL Serial No. KE-25026), New Zealand (NZIoC 52628-03-2), Philippines (PICCS 52628- 03-2), and United States (TSCA 52628-03-2). It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- Health Effects
POLYSTEP HPE is corrosive to skin and eye at 100% active. The product may also cause allergic skin reaction.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e., safety goggles, dust mask and gloves) should be employed when handling POLYSTEP HPE. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material.
Container Storage
It is recommended that POLYSTEP HPE be stored in original sealed containers and kept at temperatures below 95 °F (35 °C). Product is stable under recommended storage conditions. Keep product away from heat and sources of ignition. Avoid exposure to UV light or loss of dissolved oxygen.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.