Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- INCI Name
- Agrochemical Functions
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Industrial Additives Functions
- CAS No.
- 68891-38-3
- EC No.
- 500-234-8
- Technologies
- Product Families
- Chemical Structure
CH3(CH2)10 CH2(OCH2CH2)3 OSO3Na
Features & Benefits
- Benefit Claims
- Labeling Claims
- HII Features
- Features
Preservative Free
- Biodegradability
Product is readily biodegradable.
Applications & Uses
- Markets
- Applications
- Application Format
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Personal Hygiene Applications
- Skin Care Applications
- Applications
- STEOL CS-460 is a biodegradable linear fatty alcohol ether sulfate. Stepan's continuous SO₃ process minimizes salt and free alcohol content and eliminates the presence of chlorides, thus permitting a more consistent control of viscosity. It is a clear liquid of exceptionally light color and good odor. STEOL CS-460 is mild with excellent detergent and foaming properties in hard and soft water and is compatible with other anionics, nonionics, and alkaline builders.
- STEOL CS-460 is used in high foaming dishwashing detergents and many industrial cleaners. The physical properties of this surfactant suggest many other applications such as shampoos, liquid detergents, foaming agents, heavy duty alkaline cleaners, emulsifiers, textile mill kier boiling bleach assistants, and neutral and alkaline scouring. Foam stability in the presence of soap is much improved over other anionics, therefore STEOL CS-460 is recommended for cleaning products containing soap as an ingredient.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions Alcohol Insolubles 0.25 % - Actives Content (EW 441) 59.4 % - Boiling Point 88 °C - pH (10% in aqueous solution) 8.11 - - Cloud Point 4 °C - Color (in 5% active) 30 - Klett Colorimeter Unsulfated Alcohol 2.49 % - Density 1.03 g/ml - Solids Content 61.2 % - Flash Point 25 °C PMCC Flash Point Tester Viscosity (at 25°C) 200 cPs - Viscosity (at 60 °C) 15 cPs - Pour Point -1 °C - Freeze Point -4 °C - Critical Micelle Concentration (CMC) 74 mg/L - Regulated Volatile Organic Chemicals (Ethanol) 14 % U.S. EPA
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Health Effects
STEOL CS-460 is slightly toxic orally (LD₅₀ >5g/kg) and causes mild skin and moderate eye irritation at 10% active.
Packaging & Availability
Storage & Handling
- Storage & Handling
- Non-Bulk Storage Recommendations: It is recommended that STEOL CS-460 be stored in sealed containers kept in a well-ventilated area away from sparks, fire, and open flame. Avoid overheating or freezing. Equipment should be grounded when transferring or using material.
- Bulk Storage Recommendations: STEOL CS-460 should be stored in vessels of 316 stainless steel or fiberglass with an Atlac 382 corrosion liner, atmospheric storage with a flame arrestor, and electrically grounded fittings are recommended. Material should be stored between 26-32°C (80-90°F). Pumps, pipes and transfer lines should be 316 stainless steel.
- Normal safety precautions (i.e., gloves and safety goggles) should be employed when handing STEOL CS-460. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling STEOL CS-460.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.