Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Cleaning Ingredients Functions
- CAS No.
- 126-92-1
- EC No.
- 204-812-8
- Technologies
- Product Families
- Preservative
Formaldehyde
Features & Benefits
- Fluids & Lubricants Features
- HII Features
- Functional Properties
- Low foaming detergent
- Excellent wetting/penetration properties
- Stable in high concentration of electrolytes
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Home Care Applications
- I&I Cleaning Applications
- End Product Uses
- Fruit: peeling in caustic solutions
- Fountain Solutions: for offset printing
- Wallpaper: removal solutions
- Adhesive Formulations: with urea formaldehyde resins
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions Color 2 - Gardener Scale Sodium Sulfate Content 1 % - Density 1.11 g/ml - pH (8% aqueous) 8 - - Flash Point min. 94 °C PMCC Flash Point Tester Actives Content (MW 232) 39.5 % - Sodium Chloride Content 0.5 % - Viscosity (at 25°C) 35 cPs - Freeze Point -4 °C -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of STEPANOL EHS are listed in the following countries; the registration numbers are included in parentheses: United States (TSCA 126-91-1), Europe (EINECS 204-812-8), Canada (DSL 126-92-1), Australia (AICS 126-92-1), Korea (ECL Serial No. KE-32638), Philippines (PICCS 126-92-1), Japan (ENCS 2-2840), China (EICS Part 3), and Switzerland (SWISS No. G-3117). It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- Toxicity
Product is slightly toxic orally (LD50, rat = 4 g/kg) and slightly toxic dermally (LD50, rat = 4730 mg/kg). STEPANOL EHS may cause moderate irritation to the eyes and skin.
Packaging & Availability
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling STEPANOL EHS. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material. It is recommended that STEPANOL EHS be stored in sealed containers and kept at temperatures between 40 °F (4.5 °C) and 120 °F (49 °C). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use.
Bulk Storage Information
Tanks made of 316 stainless steel or fiberglass with an Atlac 382 corrosion liner are recommended. Centrifugal or positive displacement pumps and piping should be 316 stainless steel. Recommended storage for bulk tanks is 40-120 °F (4.5 – 49 °C).