Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
Features & Benefits
- Agrochemicals Features
Applications & Uses
- Product Applications
STEPGROW® AB 1015 is a surfactant blend developed as wetting and spreading agent for low viscosity agrochemical formulations. STEPGROW® AB 1015 has shown excellent performance when used in Paraquat, and Paraquat plus Diuron formulations.
Properties
- Physical Form
- Appearance
- Clear yellow liquid (at 25°C)
- Typical Properties
Value | Units | Test Method / Conditions | |
Active Content (EW 346) | 20.5 | % | - |
pH (as is, at 25°C) | 9.0 | - | - |
Solids Content | 44.0 | % | - |
Flash Point | min. 93.9 | °C | PMCC |
Density (at 20°C) | 1.12 | g/ml | - |
Viscosity (at 25°C) | 194.0 | cPs | - |
Boiling Point | 100.0 | ºC | - |
Density (at 25°C) | 1.12 | g/ml | - |
Specific Gravity (at 25°C) | 1.12 | - | - |
Reactive Volatile Organic Compounds | 0.0 | % | U.S. EPA |
Regulatory & Compliance
Safety & Health
- Health Effects
STEPGROW® AB 1015 is expected to be slightly toxic orally (LD50 > 1000 mg/kg) and moderately irritating to the skin and eyes when tested as sold.
- Safety Precautions
Normal safety precautions (e.g., gloves and safety goggles) should be employed when handling STEPGROW® AB 1015. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling STEPGROW® AB 1015
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace safety practices should be used to control these exposures.
Storage & Handling
- Storage and Handling Conditions
- Non-Bulk Storage Recommendations: STEPGROW® AB 1015 should be stored in closed containers and kept in a cool, dry place away from incompatible materials (see Section 10 of the SDS). Product stored in drums at temperatures below 0°C (32°F) may thicken. Product storage in drums may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 38°C (100°F) are not recommended.
- Bulk Storage Recommendations: STEPGROW® AB 1015 should be stored in vessels of 316 stainless steel. Heating and agitation are recommended for outside storage. Material should be stored between 20 - 38°C (68 - 100°F). An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Pumps, pipes and transfer lines should be 316 stainless steel.