Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Compositions and Materials
Acrylic latexbased compound, supplied in water and solvent vehicle. Formulated with penetrating, leveling, and film toughening additives. Grout Stain is used directly from the container and should not be mixed or diluted with any other additives.
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
-
Easy to Use
-
Restores or Changes Existing Grout Color
-
Extends Grout Joint Life
-
Highly Stain and Wear Resistant
-
- Advantages
Grout Stain is a high performance sealer that extends grout joint life and reduces daily maintenance to a minimum. Resists wear, abrasion, dirt, grease, chemicals, oil, and gasoline. Prevents stains and is highly water resistant. Dries quickly and clear. Leaves a semi-gloss shine to the treated surface, enhancing the appearance. Safe, non-hazardous, and nearly odorless. Grout Stain is repairable-sections of a floor may be recoated.
Colors: To match all of Super-Tek's standard grout colors. Custom colors available by special order.
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Uses
Seals ceramic tile, marble and slate joints on floors, countertops, etc. Excellent for high traffic areas, walkways, ramps, foyers, entrance ramps, etc. A must for commercial kitchens and restaurants.
- Installation
Surface Preparation: The only preparation requirement is that the surface to be sealed must be clean and dry. Freshly grouted joints between ceramic tile must be fully cured (28 days) before application.
- Application
Simply sponge or paint onto surface. Additional coats may be readily applied.
Safety & Health
- Safety
Precautions: Avoid contact with skin. In case of contact wash thoroughly with water. For eyes, get prompt medical attention. Keep out of reach of children.
Cleaning: Wash with water while fresh.
Warning! Eye And Skin Irritant.
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. In case of eye contact, immediately flush with plenty of water for at least 15 minutes, consult physician immediately. For skin contact, wash affected area with soap and water. For additional information, see Safety Data Sheet (SDS) for this product on our website.
Keep Out Of The Reach Of Children!
Packaging & Availability
- Packaging Type
- Packaging
Packaged in pint (0.47L) metal cans.
Storage & Handling
- Storage and Shelf Life
Storage life: One year if stored in cool, dry location. Close partially used containers tightly after each use.
Maintenance: Grout Stain is a tough, resilient coating. Rinse floors with mild soap and water to remove dirt.
Limitations: Do not use on tumbled marble, limestone, and other porous tiles or stone. Do not use over metal or wood substrates. Protect from freezing. Freezethaw stable for five cycles.
Shelf Life: One year when stored in original packaging in a dry, ventilated place. Exposure to moisture will shorten the shelf life.