Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Used With
- Natural
- Engineered Porous Stone
- Flowing Uses
- Laminating
- Rodding
- Crack / Chip Repair
- Knife Grade Uses
- Seaming
- Laminating Rodding
- Crack / Chip Repair
- Direction of Use
To achieve the best results, the contact surfaces must be thoroughly cleaned and dried. Before adding the hardener, the resin may be tinted with Superior Coloring Paste to match the color of the stone. The resin is then thoroughly mixed with 2%-4% of the white paste hardener (BPO) by weight. At a temperature of 70°F (21°C), the mixture stays workable for 4-6 minutes. Higher temperatures shorten the working time and lower temperatures extend the working time. After 20-30 minutes, the adhesive is fully cured and work can continue with the stone. For indoor use only.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Mix Ratio | 2 - 4 | % | — |
| Gel Time | 3 - 5 | mins | — |
| Cure Time | 25.0 | mins | — |
Packaging & Availability
- Packaging
- Quart
- Gallon
- 2-PAK
- 5-Gallon Pail
- Standard Big Box
- Enhanced Big Box
Storage & Handling
- Shelf Life
- 1 Year
- Storage
- Store indoors at room temperature
- Do not store above 75°F (24°C)
- High heat and cold temperatures will adversely affect the shelf life
- Avoid storage in direct sunlight and where freeze/thaw conditions may exist
- Vehichle Temperature
Outside Temp. Inside Temp. (10 Mins.) Inside Temp. (30 Mins.) 21°C 32°C 40°C 24°C 34°C 43°C 27°C 37°C 46°C 29°C 40°C 49°C 32°C 43°C 51°C 35°C 46°C 54°C