HS 300LV Premium Low VOC Acrylic - UPI Sealant Products

Identification & Functionality

Chemical Family: Acrylics & Acrylates
Product Type: 1K (1 component) Coating,
Sealer
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Primers & Sealers

Features & Benefits

Labeling Claims: Low VOC
Ready-to-Use Product Features: High Performance,
Low VOC
Features: The unique silane formulation creates the nano-sealer technology that deeply penetrates and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond capacity.

Even in warmer climates HS 300LV's slower evaporating solvents will not “cotton candy” before the applicator can finish a tight, smooth surface.

A single coat application will provide a UV shield, enhance the beauty, and protect the surface of driveways, garage floors, patios, walkways, pool decks, and stucco.

Applications & Uses

Markets: Building & Construction
Applications: Building & Construction — Building Materials
Pools & Landscaping
Building & Construction — Flooring & Surfaces
Floor Coatings
Application Area: Pool,
Stucco
Coverage: Varies upon substrate: approximately 200 - 240 ft² per gal., per coat; 6.7 - 8 mils wet; 1.3 - 1.6 mils cured.
Suitability Sample: Due to condition specific sites, always prepare an adequate number of test areas.

Wear protection system and esthetic suitability for products’ intended use should be included.

On-site sample approval is especially critical on substantial, heavy traffic situation or custom coloration.
Clean-Up: Before the product dries; spills and tools can be cleaned up with a solvent such as xylene or acetone.
Limitations: For use by trained professionals that have read the complete SDS.

The product is strictly for interior use, upon a well-drained concrete slab with an appropriate vapor barrier, subject to no hydrostatic pressure.

When masking use caution while taping to a floor that is not completely cured, especially at the edges, as delamination may occur.

Protect from metal wheel traffic and some furniture where point of contact may be damaging.

Chemicals used in tire manufacturing may be detrimental to all sealers from vehicular parking
Application Temperature: 50 - 90 °F

Properties

Appearance: Clear (Wet), Clear Gloss (Cured)
Odor: Solvent
Chemical Properties
Typical Properties
Hot Tire Pick-Up*: Under extreme circumstances, delaminating could occur.

All tire manufacturers were not tested.

Chemicals used in tire manufacturing may be detrimental to all sealers from vehicular parking.

Regulatory & Compliance

Slip Resistance: Two recognized US agencies have issued directives on minimum coefficient of friction, OSHA (Occupational Safety and Health Administration) and Department of Justice through the ADA (Americans with Disabilities Act).

ADA is the more stringent of the two. ADA directs that accessible walkways have a minimum coefficient of friction of 0.6. Ramps have been directed to be 0.8.

The applicator assumes the responsibility to meet these standards. Areas that may become wet, oily, or greasy require special attention.

Technical Details & Test Data

Weather Testing: QUV accelerated

ASTM G-53

No blistering, no yellowing

250hours

Safety & Health

Caution: Keep out of reach of children.

Inhalation:

Avoid prolonged breathing of airborne dust, particularly present during mixing.

Use NIOSH approved respirator for nuisance if threshold limit values are unsafe.

Skin Contact:

Skin contact may cause irritation.

Remove contaminated clothing and wash affected skin with soap and water.

Launder clothing before reuse.

If symptoms persist, seek medical attention.

Eyes:

Wear safety eye protection when applying.

Contact with eyes may cause irritation.

Flush eyes with water for 15 minutes.

If symptoms persist, seek medical attention.

Packaging & Availability

Storage & Handling

Shelf Life: Under normal, moisture free conditions 2 years for unopened container.

SureCrete HS 300LV Premium Low VOC Acrylic