Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- New vehicle frame, underbody and wheel-well corrosion preventative
- Low VOC, cost-effective formulation
- Simple non-drip overhead application
Applications & Uses
- Markets
- Applications
- Application Method
- Surface Preparation
Surface must be clean, dry and free of loose scale, rust and related contaminates.
- Applications
Surface must be clean and dry, free of water, oils and other contaminants. Airless or Air assist airless spray equipment is recommended for application; set-up is typical to that of high solids coatings. Starting points for application can be 15:1 airless pump with a 0.023” tip. Clean equipment with soap and warm water before the product sets. If the material is dry, use varsol or petroleum naphtha for cleanup. This is a water based product. Please keep from freezing.
Properties
- Odor
- Mild petroleum
- Physical Properties
Value | Units | Test Method / Conditions | |
Density | 10.9 - 11.1 | Lbs / Gal | - |
Solids by Volume | 48 - 52 | % | - |
VOC Content | 24.0 | g/L | - |
Viscosity | 8,000 - 15,000 | cP | - |
Technical Details & Test Data
- Performance Data
Test Method Specification Result Corrosion Salt Spray ASTM B117 1000 Hrs at10 mils <5% Corrosion High Temperature Resistance Internal SWT Method Expose to open flame for 25 seconds Does not ignite Flash Point PMCC none