company tower banner
Synthecoat Company Logo

Synthan PE-3008

1 of 5 products in this brand
Synthan PE-3008 is moisture curing prepolymer based on aromatic polyisocyanate.

Chemical Family: Polyisocyanates

Compatible Polymers & Resins: Polyurethanes (PU)

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
CASE Ingredients Functions
Technologies

Features & Benefits

Applications & Uses

Compatible Polymers & Resins
Compatible Substrates & Surfaces
Cure Method
Adhesive & Sealant Type
Applications

One component adhesive. SYNTHAN PE 3008 is especially recommended to 1 K humidity curing polyurethane prepolymers designed to binder recycled rubber granules.
The General dosage used in the application:
Granules 86 – 91 %
Synthan PE-3008 8 – 12 %
Water 1 – 2 %
The final dosage is decided by the client with homologation tests

Properties

Typical Properties
ValueUnitsTest Method / Conditions
NCO Contents (weight)7.00 - 8.00%
Brookfield Viscosity (25°C)1600 - 2200cps
Relative density (22°C)1.14g/cm3

Regulatory & Compliance

Certifications & Compliance

Storage & Handling

Storage

The product must be stored with absolute exclusion of moisture. It is absolutely necessary to avoid the entry of water in any form (wet containers, aqueous solvents, air humidity, etc.) when handling the product and during its preparation, because it reacts with water. For this reason, the containers must be tightly closed with nitrogen after each product extraction. Avoid low temperatures because they can cause the precipitation of product temperatures. It is recommended specified in a thermal range between + 15º and + 30º C. Under the above mentioned conditions, sealed and in its original packaging, this resin has a shelf life of 6 months

Handling

Synthan PE-3008 is a potentially hazardous material and proper handling and safety precautions are required.