Knowde Enhanced TDS
Identification & Functionality
- CI Name
- Pigment Type
- CASE Ingredients Functions
- Chemical Class
- Organic pigment
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Application Possibilities
Main Application
- Paints based on polymer dispersions of - Polyvinylacetate
- Paints based on polymer dispersions of - Acrylate
- Paints based on polymer dispersions of - Alkyde
- Paints for plasters - Acrylate
- Wood stains
Properties
- Color
- Typical Properties
- Fastness Properties
| Value | Units | Test Method / Conditions | |
| Content of Pigment | 40 | % | - |
| Content of Solids | 50 | % | - |
| pH Value | 6 - 9 | - | - |
| Specific Gravity | 1.2 | g/cm³ | - |
| Value | Units | Test Method / Conditions | |
| Light - Full Shade (1/1) | 5-6 | - | - |
| Light - B=1/6 | 4-5 | - | - |
| Resistance to Acids | 5 | - | - |
| Resistance to Alkali | 5 | - | - |
Technical Details & Test Data
- Testing Methods
- Pigment preparations Versanyl are standardized in color strength and color shade. These properties are tested on the level of standard depth B = 1/6 by mixing of pigment preparation with the paint BALAKRYL V 2045/0100. Difference in color strength ± 5 % is guarantined.
- Content of pigment is tested by centrifuge method, small variability against the average value in the table is allowed, the value is not guarantined, because of garancy for color strength.
- Content of solids 2 g of pigment dispersion was dryed in the lab oven at 105 °C till the constant weight. The value is not guaranteed, because it of garancy for color strength.
- Specific weight determined by pycnometric method. It depends on content of pigment
- pH is determined by measuring of 4 % solution in destilled water. It depends on content of pigment
- Lightfastness - Xenotest determined by ČSN EN ISO 105-B02; 2000 (80 0147) in deep shade paint and in the level of standard depth B = 1/6, evaluated according to blue scale, by it degree 1 denotes the lowest fastness, degree 8 the highest one.
- Resistance to alkalis and acids 1,5 cm wide strips of draw downs at standard depth B = 1/3 were immersed with the dwell time of 5 min. in 2 % solution of caustic soda or 5 % hydrochloric acid, then washed and dryed. The change of the shade was evalued against the not immersed draw down by ISO - Gray scale. Degree 1 denotes the lowest fastness, degree 5 the highest one.