Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
- Composition
appr. 42 % phthalate resin
appr. 38 % tall oil/wood oil
appr. 20 % modified resins
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Uses
Air-and stove-drying primers - zincphosphat - knife fillers - nitro solid primers - fast drying
interior industrial paints.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Non Volatile Content | 60 | w % | AV-F-F003 |
Acid Value | max. 25 | mg KOH/g | — |
Color Value (Iodine) | Max. 25 | — | — |
Density | 1.01 | g/ml | AV-F-0D001 |
Flash point | 32 | °C | AV-F-f006 |
Flow Time | 140-200 | sec | AV-F-V003 |
Technical Details & Test Data
- Solubility
Petroleum spirit 100/140 -
Oil of terpentine +
Xylene +
Trichlorethylene +
Butyl acetate +
Methyl isobutyl ketone +
Butyl glycol +
Ethyl glycol acetate +
Butanol oWhite spirit o
Toluene +
Solvent naphtha +
Ethyl acetate +
Methyl ethyl ketone +
Ethyl glycol +
Methyl glycol acetate +
Ethanol -
Diacetone alcohol x+ = dilutable/compatible
x = largely dilutable/compatible
o = limited dilutability or not dilutable/compatilble
- = very limited dilutability or not dilutable/compatible- Compatibility
Linseed oil for varnish -
Linseed oil-stand oil 90 P -
Medium-oil drying alkyds +
Long-oil drying alkyds -
Epoxy ester x
Phenol-mod. colophony resins +
Ketone resins o
Unplast. melamine resins +
Cyclorubber o
Ester-soluble nitrocellulose +Linseed oil-stand oil 30 P -
Short-oil drying alkyds o
Short-oil non-drying alkyds o
Maleic resin +
Alkyl/terpene phenolic resin +
Unplast. urea resins +
Chlorine rubber -
Chorinated vinyl polymers -
Basic pigments -+ = dilutable/compatible
x = largely dilutable/compatible
o = limited dilutability or not dilutable/compatilble
- = very limited dilutability or not dilutable/compatible- Film Properties and Processing
Because of ist composition Lioptal 541 is a special-purpose binder for air- and stove-drying
primers with very short drying times and excellent overspray tolerance. Through combination
with other short-oil or medium-oil drying alkyd resin, epoxy esters and urea or melamine resins
a wide range of possibilities are obtained not only in the primer sector but also for fast-drying
industrial coatings.
For prime coats and anti-corrosive primers the type and amount of pigments are of vital
importance. Besides zinc phosphate and red iron oxide particularly flaked fillers, such as talc,
have given good results.
Possible dryers are primarily cobalt-lead-manganese or cobalt-barium-zinc mixtures. Relative to
100% alkyd resin we recommend the following amounts depending on the intended use: 0.03-
0.05 % cobalt, 0.30-0.50 % lead- and 0.03-0.04 % manganese metal.
Packaging & Availability
- Supplied AS
60 % in xylene