Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Characteristics
- Injection
- High flow for process
- High productivity
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- TV housing
- Vacuum cleaner
- Air conditioner
- Cash registers
Properties
- Color
- Flame Rating
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Injection Molding
- Rheological Properties
Value | Units | Test Method / Conditions | |
Moisture Absorption Equilibrium (23°C/50% RH) | max. 0.3 | wt% | ASTMD570 |
Mold Shrinkage (60×60×2mm SFlow) | max. 0.4 | wt% | ASTMD955 |
Rockwell Hardness (23°C, R-scale) | 107.0 | R-scale | ASTMD785 |
Value | Units | Test Method / Conditions | |
Elongation at Break (23°C, 5 mm/min) | 30.0 | % | ASTMD638 |
Flexural Modulus (23°C, 2.8 mm/min) | 27000.0 | kg/cm2 | ASTMD790 |
Flexural Yield (23°C, 2.8 mm/min) | 750.0 | kg/cm2 | ASTMD790 |
Izod Impact Strength (23°C, 1/4” Notched) | 16.0 | kg-cm/cm | ASTMD256 |
Izod Impact Strength (23°C, 1/8” Notched) | 18.0 | kg-cm/cm | ASTMD256 |
Tensile Strength at Break (23°C, 5 mm/min) | 350.0 | kg/cm2 | ASTMD638 |
Tensile Strength at Yield (23°C, 5 mm/min) | 400.0 | kg/cm2 | ASTMD638 |
Value | Units | Test Method / Conditions | |
Heat Distortion Temperature (Unannealing 1.8MPa) | 84.0 | °C | ASTMD648 |
RTI Elec (1.5 mm) | 60.0 | - | UL 746 |
RTI Elec (3.0 mm) | 60.0 | - | UL 746 |
RTI Imp (1.5 mm) | 60.0 | - | UL 746 |
RTI Imp (3.0 mm) | 60.0 | - | UL 746 |
RTI Str (1.5 mm) | 60.0 | - | UL 746 |
RTI Str (3.0 mm) | 60.0 | - | UL 746 |
Vicat Softening Temperature (50°C/hr , 1 kg load) | 98.0 | °C | ASTMD1525 |
Value | Units | Test Method / Conditions | |
Arc Resistance | PLC 6 | - | ASTM D495 |
Arc Tracking Rate (0.062 inch above) | 0.0 | in/min | UL-746A |
Comparative Tracking Index | PLC 1 | - | UL 746 |
Dielictric Strength | 22.0 | KV/mm | ASTM D149 |
High Amp Arc lgnition (1.5 mm) | PLC 0 | - | UL 746 |
High Current Arc Ignition (0.062 inch above) | 200.0 | Arcs | UL-746A |
High Voltage Arc Tracking Rate | PLC 0 | - | UL 746 |
Hot Wire Ignition (0.062 inch above) | 13.0 | Secs | UL-746A |
Hot-Wire Ignition (1.5 mm) | PLC 3 | - | UL 746 |
Relative Temperature Index (0.062 inch above) | 60.0 | °C | UL-746B |
Volume Resistivity | 1.0E+22 | Ohm-cm | ASTM D257 |
Value | Units | Test Method / Conditions | |
Flame Rating (1.5 mm, ALL) | HB | - | UL 94 |
Flame Rating (1.5 mm, ALL) | HB 40 | - | IEC 60695-11-10,-20 |
Flame Rating (3.0 mm, ALL) | HB | - | UL 95 |
Flame Rating (3.0 mm, ALL) | HB 75 | - | IEC 60695-11-10,-20 |
Value | Units | Test Method / Conditions | |
Back Pressure | 50 - 70 | psi(Mpa) | - |
Drying Temperature | 80 - 85 | °C | - |
Drying Time | 2.0 - 4.0 | hr | - |
Front Zone | 180 - 210 | °C | - |
Injection Pressure | Low To Moderate | - | - |
Injection Speed | Low To Moderate | - | - |
Melt Zone | 170 - 180 | °C | - |
Middle Zone | 190 - 220 | °C | - |
Mold Temperature | 40 - 70 | °C | - |
Nozzle | 200 - 230 | °C | - |
Rear Zone | 180 - 210 | °C | - |
Screw Speed | 30 - 100 | rpm | - |
Value | Units | Test Method / Conditions | |
Melt Volume Rate (200°C, 5kg load) | 5.5 | g/10min | ASTM D1238 |
Melt Volume Rate (220°C, 10kg load) | 45.0 | g/10min | ASTM D1238 |
Specific Gravity (23°C) | 1.03 | g/cm3 | ASTM D792 |
Regulatory & Compliance
- Certifications & Compliance