Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
Especially designed to maintain the natural look of the wood and to protect it from moisture penetration. Contains active agents to prevent mold development. Fast drying. Easy to apply. Free of lead and chromates and therefore suitable to use on children's furniture and toys. Certified eco-friendly.
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Recommended Uses
Recommended for application on interior and exterior wooden surfaces such as: pergolas, children's furniture and toys, garden furniture, roof frames, wooden fences, doors and door frames.
- Technical Data
- Calculated coverage *: New, unpainted wood: 9 sqm./liter (in one coat)
- Painted wood: 12 sqm./liter (in one coat)
- Recommended dilution: Ready to use
- Drying times: Touch **: 1 hour
- Recoat: 2-3 hours
- Final: 24 hours
* The actual coverage rate can vary, depending on the surface, the application mode, the painter’s skill and weather conditions at the site. Assume approximately 75% of the calculated coverage ability. ** At 25°C and 65% humidity.
- Surface Preparation and the Painting System
Notice : application of the transparent Water Based Varnit alone does not provide full protection from UV radiation. It is recommended to apply first Water Based Varnit Wood Stain – Satin. Do not apply the wood stain over wet wood.
New, Unpainted Wood / Painted Wood : Sand the wood using sandpaper 0 or 360. Remove any old, loose and peeling coats and paint residue. Clean off dirt, dust and grease. Apply transparent Water Based Varnit Wood Stain.
- Application
A ready to use product. Stir the wood stain well before application and while painting. Soft Brush Application: Apply along the wood grain. Apply several coats until full coverage is achieved. The wood stain appears to have a milky white color in its can, but turns clear once it is dry.
Cleanup : Clean work tools with soap and water immediately after use. Close the container tightly to prevent air penetration.
Cautions: The paint is inedible; the paint is not defined as a dangerous substance and does not contain materials requiring special markings or warnings. Keep out of reach of children. Use in a well ventilated area only.
- General Notes
Do not apply when the wall is wet and/or rain is expected for about 72 hours before or after the application and/or the wall temperature is below 10°C and the relative humidity is above 85%. Do not mix this product with products not recommended by us. Achieving desired results is dependent on the proper application of the product while following all instructions. Before applying the product, the user must make sure that the product is indeed designed for the intended usage and that the surfaces to be painted are properly prepared, and are suitable for the product’s application. This product should be carefully tied down during transport.
Properties
- Color
- Appearance
- Matt
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Package Size
Package size Quantity per pallet
0.75 liter 576
Storage & Handling
- Shelf Life
- 24 Months
- Storage
Store in a roofed and well ventilated place, below 35ºC.