TBA Protective Solutions ECP 531 Conductive Carbon Acrylic Paint

Knowde Enhanced TDS

Identification & Functionality

Chemical Family: Acrylics & Acrylates,
Carbon Blacks
Product Type: 1K (1 component) Coating,
Conductive Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Protective Coatings

Features & Benefits

Applications & Uses

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Packaging & Assembly
Electronics Coatings
Application Area: Electrical Components
Application Method: Brush,
Spray
Compatible Substrates & Surfaces: Plastics
Cure Method: Air Dry
Applications: Designed for static dissipating applications.

Applications include electronics handling equipment, boxes, instrument covers.

The coating meets the requirements for the handling of static sensitive devices according to BS-EN 61340.

Applications such as components and instruments need to comply with ATEX requirements for hazardous environments.

Properties

	Value	Units	Test Method / Conditions
Coverage Per Litre (at 50 microns, Depends on Substrate)	7 - 10	sq metres	-
Drying Time (Full)	12	hours	-
Drying Time (Touch)	20	minutes	-
Flash Point	25	ºC	-
Operating Temperature Range	550 - 1250	°C	-
Recommended Dry Film Thickness	50	micron	-
Specific Gravity	0.91	g/cm³	-
Surface Resistivity (at 3 thou / 75 microns)	max. 10⁶	ohms/sq	-

Regulatory & Compliance

Technical Details & Test Data

Method of Use: Surface Preparation: All contaminants including mold release, grease and dirt must be removed. A suitable primer may be necessary on certain substrates eg, polypropylene.

Mixing: Some settling may occur in the can so the car must be taken to mix in all solids. Should any dilution be necessary Xylene or MEK should be used.

Application: ECP 531 can be applied either by a conventional spray-gun (40 psi line pressure) or by brush coating.

Safety & Health

Precautions: Highly flammable - flash point 25°C. Keep away from heat, sparks and open flames. Keep all containers closed when not in use.

Use under well-ventilated conditions. Personal respiratory protection should be worn under spraying conditions. Such devices must be used in accordance with the manufacturer's instructions.

Avoid contact with skin. Wear protective gloves and clothing. Wash thoroughly with soap and water after use. If accidentally swallowed seek medical advice.

Packaging & Availability