Brands

PowerKote is a thermally cured Dry Film Lubricant. DFL-1 makes use of a unique binding system to retain high temperature stability while reducing friction. The film thickness of DFL-1, as applied, ranges from .0005" to .001". DFL-1 achieves full cure at 300°F, after 1 hour at temperature. When cured, DFL-1 is not affected by most chemicals. DFL-1 is not designed to provide corrosion resistance as it is normally used as a “wet” lubricant in conjunction with oil or other liquid lubricants. The lubricating ingredients in DFL-1 can lubricate at pressures above 350,000 PSI. Parts coated with DFL-1 will experience extended life compared to uncoated parts.

Carrera LTC is a clear ceramic coating capable of providing extremely high levels of chemical, corrosion and thermal protection in very thin films. When properly applied Carrera LTC will withstand substrate temperatures over 500°F. Carrera LTC will air cure over a period of 24 hours, though it will be dry to the touch and accept reasonable handling in less than 1 hour and may be placed in service after 8 to 10 hours. Maximum hardness is achieved after 7 days. Carrera LTC requires no surface etch and will bond to extremely smooth surfaces. Simply degrease and apply. The coating cures to a very hard, smooth surface with excellent adhesion. Carrera LTC has excellent resistance to UV. Carrera LTCis solvent based with very low to no V.O.C. depending on formulation.