Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Base
- Polychloroprene
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Field Of Application
Technicoll® 8058 is a sprayable, heat resistant contact adhesive with high initial tack.
- Favoured Substrates
- Rubber
- Coated surfaces (primed, painted)
- Metals (stainless steel, steel, aluminum)
- Cork
- Derived timber products
- Leather
- Plastics (unplasticised)
- Fabrics
- PUR foam
- Not suitable for: PE, PP, PTFE (Teflon® ), POM, silicone, EPDM, PVC-plasticised (faux leather) PS-rigid foams (e.g. Styropor® )
- Due to the large variety of possible materials and differences in adhesion behavior hazard tests are mandatory before introducing the adhesive into the actual production process.
- Application & Uses
Surface preparation
Bonding surfaces must be dry and clean, especially free of oil, grease or release agents. In many cases, surface roughening prior to bonding improves strength of bonded joint. It is recommended when working with rubber and metals.
Adhesion
Stir adhesive before use. Apply a thin layer of technicoll® 8058 equally to both sides of the bonding surface of the substrates (brush, spraying gun). After the application solvent needs to evaporate. The usual waiting time is just a few minutes. It depends on the applied amount of adhesive and the indoor climate. The right time for the bonding has come as soon as the applied adhesive does not pull strings anymore when touching with the finger, but still feels very sticky. Join the substrates together accurately and assemble quickly under high pressure. The good bond strength that is achieved immediately, usually allows further processing with the bonded substances right away. Completely dried but not finally cured layers of adhesive can be activated by applying a solvent like technicoll® 8367. Wait for a couple of days before assessing the final strength.
Way Of Application Two-sided Cleaning Agent / Material Technicoll® 8367 Cleaning Agent / Material (Metal Cleaning Spray) Technicoll® 9901 Cleaning Agent / Material (Plastics Cleaning Spray) Technicoll® 9902 Cleaning Agent / Tool ( Technicoll® 8367, Spray) Technicoll® 9901 Cleaning Agent / Tool ( Technicoll® 8367, Spray) Technicoll® 9901
Properties
- Typical Properties
- Handling Properties
- Behaviour At Low Temperature
Not susceptible to frost. Densification at low temperature. Once adjusted to processing temperature: fully employable.
- Handling Properties
- Dilution - Not Necessary, Possible With Technicoll® 8367
- Cleaning - Cured adhesive can only be removed mechanically.
| Value | Units | Test Method / Conditions | |
| Viscosity (20°C) | approx. 275 | mPas | — |
| Solid Content | approx. 19 | % | — |
| Density | approx. 0.8 | g/cm³ | — |
| Processing Temperature | 15 - 25 | °C | — |
| Value | Units | Test Method / Conditions | |
| Drying Time | approx. 1 - 3 | minutes | — |
| Contact Life (Depending On Temperature, Substrate And Quantity Of Adhesive) | approx. 15 - 20 | minutes | — |
| Way Of Application | Two-sided | — | — |
| Consumption | 150 - 250 | g/m² | — |
| Cleaning Agent / Material | Technicoll® 8367 | — | — |
| Cleaning Agent / Material (Metal Cleaning Spray) | Technicoll® 9901 | — | — |
| Cleaning Agent / Material (Plastics Cleaning Spray) | Technicoll® 9902 | — | — |
| Cleaning Agent / Tool ( Technicoll® 8367, Spray) | Technicoll® 9901 | — | — |
Storage & Handling
- Preferred Storage Temperature
- 10°C - 25°C
- Maximum Time Of Storage
At least 1 year when stored in sealed original packaging in cool and dry places.