Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Base
- Styrene-Butadiene Rubber (SBR)
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Special Characteristics
Technicoll® 8153 is a fast setting, unfilled contact adhesive with a high resistance to water and heat.
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Field Of Application
Bonding of PS – rigid foams and insulation materials, such as mineral or glass fiber mats with metal, bituminised felts, aluminum and different kinds of unplasticised polymeric films.
- Favoured Substrates
- Polystyrene rigid foam (PS, EPS, XPS)
- Styropor®, Styrodur®
- Metals
- Bituminised felt
- Glass fiber mats with:
- Concrete, render
- Felt
- Aluminum foil
- Mineral fiber mats
- Derived timber products ●
- Plastic films (unplasticised)
- Not suitable for: PE, PP, PTFE (Teflon®), POM, silicone, EPDM, PVC plasticised (faux leather)
- Due to the large variety of possible materials and differences in adhesion behavior hazard tests are mandatory before introducing the adhesive into the actual production process.
- Application & Uses
Surface preparation
Bonding surfaces must be dry and clean, especially free of oil, grease or release agents. In many cases, surface roughening prior to bonding improves strength of bonded joint. It is recommended when working with rubber and metals.
Adhesion
Stir adhesive before use. Apply a thin layer of technicoll® 8153 equally to both sides of the bonding surface of the substrates (brush, trowel, closed roller). After the application solvent needs to evaporate. The usual waiting time is just a few minutes. It depends on the applied amount of adhesive and the indoor climate. The right time for the bonding has come as soon as the applied adhesive does not pull strings anymore when touching with the finger, but still feels very sticky. Join the substrates together accurately and assemble quickly under high pressure. The good bond strength that is achieved immediately, usually allows further processing with the bonded substances right away. In some cases a one-sided application might be possible: Apply a thick layer of technicoll® 8153 equally to one side and join both surfaces immediately. Wait for a couple of days before assessing the final strength.
Way Of Application Two-sided Cleaning Agent / Material Technicoll® 8363 Cleaning Agent / Material (Metal Cleaning Spray) Technicoll® 9901 Cleaning Agent / Material (Plastics Cleaning Spray) Technicoll® 9902 Cleaning Agent / Tool (Technicoll® 8363, Spray) Technicoll® 9901 Cleaning Agent / Tool (Technicoll® 8363, Spray) Technicoll® 9901
Properties
- Typical Properties
- Handling Properties
- Behaviour At Low Temperature
Not susceptible to frost. Densification at low temperature. Once adjusted to processing temperature: fully employable.
- Handling Properties
- Dilution - Not Necessary, Possible With Technicoll® 8363.
- Cleaning - Cured adhesive can only be removed mechanically.
| Value | Units | Test Method / Conditions | |
| Viscosity (20°C) | approx. 1800 | mPas | - |
| Solid Content | approx. 36 | % | - |
| Density | approx. 0.8 | g/cm³ | - |
| Processing Temperature | 15 - 25 | °C | - |
| Value | Units | Test Method / Conditions | |
| Drying Time | 1 - 3 | minutes | - |
| Contact Life (Depending On Temperature, Substrate And Quantity Of Adhesive) | approx. 10 - 15 | minutes | - |
| Way Of Application | Two-sided | - | - |
| Consumption | 150 - 250 | g/m² | - |
| Cleaning Agent / Material | Technicoll® 8363 | - | - |
| Cleaning Agent / Material (Metal Cleaning Spray) | Technicoll® 9901 | - | - |
| Cleaning Agent / Material (Plastics Cleaning Spray) | Technicoll® 9902 | - | - |
| Cleaning Agent / Tool (Technicoll® 8363, Spray) | Technicoll® 9901 | - | - |
Storage & Handling
- Preferred Storage Temperature
- 10°C - 25°C
- Maximum Time Of Storage
At least 1 year when stored in sealed original packaging in cool and dry place.