Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Base
- Styrene-Butadiene-Styrene (SBS)
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Field Of Application
Technicoll® 9119 is a multipurpose adhesive with a precise, equal spray pattern and a wide splash valve. The spray adhesive is suitable for permanent bonding of many different combinations of materials, especially for the graphics sector.
- Favoured Substrates
- Paper, paperboard, photo base paper
- Derived timber products
- Plastic foils (plasticised)
- Glass
- Fabrics, jute, textile, cork to each other as well to
- Ceramics
- Insulating material, glass wool
- Metals
- Flexible foam (polyurethane, latex)
- Rigid foam (also Styropor®)
- Not suitable for: PE, PP, PTFE (Teflon®), POM, silicone, EPDM, PVC-p (faux leather)
- Due to the large variety of possible materials and differences in adhesion behavior hazard tests are mandatory before introducing the adhesive into the actual production process.
- Application & Uses
Surface preparation
Bonding surfaces must be dry and clean, especially free of oil, grease or solvents. Use technicoll® 8363 for cleaning surfaces of plastics. In many cases, surface roughening prior to bonding improves strength of bonded joint.
Adhesion
Shake can before use! Spray technicoll® 9119 equally in a thin layer from a distance of approx. 30 cm on the substrate. When applying the adhesive to one side of porous substrates, the substrates can be joined together immediately or after a short drying time (< 10 minutes). For contact bonding apply the adhesive to both sides. Then the solvent needs to evaporate. The usual waiting time is just a few minutes. It depends on the applied amount of adhesive and the indoor climate. The right time for bonding has come as soon as the applied adhesive does not pull strings anymore when touching with the finger, but still feels very sticky. Join the substrates together accurately and assemble quickly under high pressure. A good bonding strength is achieved immediately and usually allows further processing with the bonded substances right away. Adhesion has a high initial strength. Wait for a couple of days before assessing the final strength. When bonding diffusion closed substrates or Styropor®, only a contact bonding with a doublecoated application is possible. In order to clean the splash valve, turn can around after use and spray until only propellant gas is emitted.
Way Of Application One- And Two-sided Cleaning Agent / Material Technicoll® 8363 Cleaning Agent / Material (Metal Cleaning Spray) Technicoll® 9901 Cleaning Agent / Material (Plastics Cleaning Spray) Technicoll® 9902 Cleaning Agent / Tool (Technicoll® 8362, Spray) Technicoll® 9901 Cleaning Agent / Tool (Technicoll® 8362, Spray) Technicoll® 9901
Properties
- Typical Properties
- Handling Properties
- Behaviour At Low Temperature
Not susceptible to frost. Densification at low temperature. Once adjusted to processing temperature: fully employable.
- Handling Properties
Cleaning - Cured adhesive can only be removed mechanically.
Value | Units | Test Method / Conditions | |
Density | approx. 0.7 | g/cm³ | - |
Adhesion Time (One-sided Application) | approx. 10 | minutes | - |
Processing Temperature | 15 - 25 | °C | - |
Value | Units | Test Method / Conditions | |
Drying Time | 5 - 10 | minutes | - |
Contact Life | approx. 20 | minutes | - |
Way Of Application | One- And Two-sided | - | - |
Cleaning Agent / Material | Technicoll® 8363 | - | - |
Cleaning Agent / Material (Metal Cleaning Spray) | Technicoll® 9901 | - | - |
Cleaning Agent / Material (Plastics Cleaning Spray) | Technicoll® 9902 | - | - |
Cleaning Agent / Tool (Technicoll® 8362, Spray) | Technicoll® 9901 | - | - |
Packaging & Availability
- Packaging
500 ml spray can.
Storage & Handling
- Preferred Storage Temperature
- 10°C - 25°C
- Storage Conditions
- Maximum time of storage - At least 2 years when stored in sealed original packaging in cool and dry places.
- Pressurized container.
- Do not pierce or burn, even after use.
- Protect from sunlight.
- Do no expose to temperatures exceeding +50 °C.