Techno Compound PBT4 GF 30 LW Natural (9931)

Identification & Functionality

Chemical Family: Polyesters
Fillers Included: Glass Fiber
Polymer Name: Polybutylene Terephthalate (PBT)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyesters & Copolyesters

Features & Benefits

Materials Features: Good Flow,
Good Sliding Properties,
High Hardness,
High Stiffness,
High Strength,
High Tensile Strength,
Low Warpage,
Wear Resistant

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Electrical & Electronics,
Industrial
Applications: Automotive & Transportation — Automotive
Automotive Lighting,
Exterior & Body,
Other Automotive Applications,
Powertrain & UTH
Building & Construction — Building Materials
Pipes & Plumbing,
Structural Components
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts,
Other Industrial Applications
Electrical & Electronics — Parts & Components
Connectors,
Housings & Enclosures,
Other Parts & Components,
Switches & Relays
Plastics & Elastomers End Uses: Automotive Exterior Parts,
Bearings,
Cams,
Connectors,
Electrical Housing,
Headlight Cover,
Pump Parts,
Switches
Typical Applications: TechnoDur PBT4 GF 30 LW Natural (9931) may be applied in the following areas:

Electrical engineering: Lamp holders, micro switches, spools, brush-holder bridges, switches, cam divices, telephone housings.

Automobile construction: Junction boxes, petrol filters, fuel tank caps, heating, folds, headlights, car body panels, spark plug connectors.

Household appliances: Hair care appliances, components for toasters, fondue makers, coffeemakers.

Other: pump components, gears guide applications: slide bearings and components.

Properties

	Value	Units	Test Method / Conditions
Tensile modulus	11500	MPa	ISO 527
Stress at break	160	MPa	ISO 527
Strain at break	2,8	%	ISO 527
Charpy impact strength	55	kJ/m2	ISO 179-1eU
Charpy notched impact strength	10	kJ/m2	ISO 179-1eA
Ball indentation	220	N/mm2	ISO 2039-1

	Value	Units	Test Method / Conditions
Density	1,5	g/cm3	ISO 1183
Melt volume-flow rate	6	cm3/10 min	ISO 1133
Waterabsorption up to saturation	0,4	%	ISO 62
Moisture absorption	0,15	%	ISO 62
Molding shrinkage (longitudinal)	0,35	%	ISO 2577
Molding shrinkage (transverse)	0,7	%	ISO 2577

	Value	Units	Test Method / Conditions
Melting temperature	220 – 225	°C	ISO 11357
Temp. of deflection under load (HDT A)	200	°C	ISO 75
Temp. of deflection under load (HDT B)	215	°C	ISO 75
Temp. of deflection under load (HDT C)	120	°C	ISO 75
Vicat softening temperature	220	°C	ISO 306
Coeff. of linear therm. expansion (longitudinal)	0,2*10E-4	10–4/k	ISO 11359
Flammability test	HB	Klasse	TC

Regulatory & Compliance

Knowde Enhanced TDS