Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
• Designed for high temperature environments
• Fast-drying silicone 1-step process
• Thermal resistance - to 662°F (350°C)
• Dielectric strength - 560 volts/mil
• IPC-CC-830B Certified
• UL94 V-0 rated
• Moisture resistant
• Vibration resistant - flexible
• UV indicator for black light inspection
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Usage Instructions
Spray Application: Apply top to bottom, allowing coating to flow evenly around components. Rotate PCB 90º and repeat application. Rotate and apply coating two additional times, then allow board to cure. If additional thickness is desired, apply additional coatings. When using liquid spray with automatic dispensing equipment, adjustments may be required in application rate and viscosity.
Dip Application: Using automatic equipment or hand immersion technique, slowly immerse PCB into the coating and remove slowly. Use an average rate of approximately 1 foot per minute. After allowing the board to cure, process may be repeated to achieve desired thickness.
Brush Application: Evenly apply coating to areas desired at thickness required. Allow time for curing before reapplying to achieve a thick coating. Use WonderMASK to protect components during conformal coating process. After application, cured Fine-L-KoteTM may be removed using Techspray Conformal Coating Removal Pen (2510-N or 2510-P).
Performance & Application DataCoverage (1 mil dry film) 1 aerosol can = 20ft2 (1.9M2)1 gal. liquid = 880ft2 (81.8M2)
Properties
- Physical Form
- Odor
- Aromatic odor
- Insoluble in
- Water
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Percent Volatile | 80.0 | — | — |
| Vapor Density (Air=1) | min. 1 | — | — |
| Boiling Point | 230.0 | º F | — |
| Flashpoint and Method | 40.0 | ºF | TAG CC |
| Density | 0.92 | — | — |
| VOC | 724.0 | g/L | — |
| Value | Units | Test Method / Conditions | |
| Cure Type | Thermal/Air | — | — |
| Tack Free Time | 45.0 | minutes | — |
| Accelerated Cure Time/Temperature (1 Step,49°C) | 15.0 | minutes | — |
| Ambient Cure Time | 24.0 | Hrs | — |
| Viscosity (Bulk) | 2022-10-30 | cps | — |
| Operating Temperature Range | -40 to 350 | °C | — |
| Dielectric Strength | 560.0 | V/Mil | — |
| Insulation Resistance | 1.33 x 1016 | ohms | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Environmental Policy
Techspray® is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies.
Packaging & Availability
- Packaging and Availability
2106-12S 12oz. Liquid 2106-G 1 Gallon Liquid
Storage & Handling
- Shelf Life
- 1 Year