Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- User friendly and easy to apply
- Effective at removing a wide range of materials
- Safe for use on metals, wood, concrete, and some plastics
- Is not a Hazardous Air Pollutant
- Is not a RCRA or DOT Hazardous Material
- Contains no SARA 313 chemicals
- Contains no California Proposition 65 chemicals
- Is readily biodegradable
- Has only a moderate exposure rating for users
- Is not flammable
- Advantages
- Will strip most magnet wire coatings overnight
- Will require less material due to slow evaporation rate
- Will reduce risks associated with worker safety
- Will reduce difficulties associated with hazardous waste disposal
- Benefits
- Reduced costs associated with waste disposal
- Reduced regulatory compliance issues
- End DOT Hazardous Material transportation surcharges
- Safer work environment
- Maintained or improved process time with safer solution
- Reduced material consumption
- Improved environmental stewardship
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Recommended for
- Motor Winding Varnish and Epoxy Sealers
- Architectural Specialty Adhesives
- Other Specialty Adhesive Removal Projects
- Application
RonJohn® Electra Strip is designed to be used in an immersion bath but, can be applied by brush or spray. Depending on the type of material being removed, you will see begin results in minutes but sufficient softening for disassembly may take overnight. Heating of the product (up to 130F) will decrease the time required. Waste from the stripping process can be disposed of according to local regulations for non-hazardous waste unless the material you are stripping is a hazard. RonJohn® products typically have a unique fruity or spicy aroma. If desired, once your removal is complete this aroma can be neutralized by washing with a mild household ammonia solution. Otherwise, this aroma will dissipate over time.
- Coverage
RonJohn® Electra Strip will cover approximately 100 sq ft per gallon depending on the type, porosity, and thickness of the coating or adhesive being removed.
Properties
- Physical Form
- Appearance
- Homogenous Gel
- Physical Properties
Value | Units | Test Method / Conditions | |
Boiling Point | 166.0 | °C | — |
Flash Point | 79.0 | °C | — |
Melting Point | approx. -24 | °C | — |
pH | 5 - 7 | — | — |
Specific Gravity (Water = 1) | 1.0006 | — | — |
Vapor Pressure (20°C) | 19.15 (2.55) | mm Hg (kPa) | — |
VOC | 700.0 | grams/liter | — |
Regulatory & Compliance
- Certifications & Compliance
- Regulations
It is a safer and more environmentally friendly replacement for processes that use toxic chlorinated products like methylene chloride; better still, RonJohn® Electra Strip contains no hazardous air pollutants, RCRA listed chemicals, or chemicals controlled under other EPA regulations like SARA 313. RonJohn® Electra Strip is very effective at removing polyurethane, epoxy, enamel, acrylic, and powder-coating. With an NFPA 2,2,0 profile, RonJohn® Electra Strip is a great alternative to both dangerous conventional solvents and less effective green products.
Safety & Health
- Safe Handling
- Proper protective wear should always be worn. Users should wear butyl rubber or heavy latex gloves, eye protection, and when in poorly ventilated areas a solvent-rated filtered mask.
- In case of contact with skin, wash with soap and water.
- In case of contact with eyes, rinse thoroughly with water.
- Do not ingest. If ingested, do not induce vomiting and seek immediate medical attention.
- RonJohn® Electra Strip is a combustible material. Keep away from ignition sources.
Packaging & Availability
- Packaging
- 1 Gallon Steel F-Style Can
- 5 Gallon Rectangular HDPE Can
- 55 Gallon Steel Tight-head Drum
Storage & Handling
- Shelf Life
- 18 Months (When Kept Closed)
- Storage
Hygroscopic material. Keep container in a cool, well-ventilated area. Keep container tightly closed and sealed until ready for use. Avoid all possible sources of ignition (spark or flame). Not compatible with strong oxidizers.