Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features & Benefits
- Excellent wear resistance
- Very low coefficient of sliding friction
- Good noise damping
- High impact strength even at the lowest temperatures
- No water absorption
- Physiologically harmless
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
- Well suited for general mechanical engineering
- Excellent for conveyor and drive technology
- Packaging and beverage industry
- Assembly and automation technology
- Environmental and chemical industry
- Food industry
- Agriculture
Properties
- Color
- Flame Rating
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Average Molecular Weight | approx. 4 - 6×10⁶ | g/mol | — |
Density | 0.93 | g/cm³ | ISO 1183 |
Water Absorption | max. 0.01 | % | ISO 62 |
Flame Classification | HB | — | UL94 |
Value | Units | Test Method / Conditions | |
Yield Stress | min. 19 | N/mm² | ISO 527 |
Elongation at Yield | min. 8 | % | ISO 527 |
Modulus of Elasticity | min. 700 | MPa | ISO 527 |
Impact Strength (Charpy) | Without breakage | kJ/m² | ISO 179 |
Notched Impact Strength (Charpy) | min. 170 | kJ/m² | ISO 11542-2 |
Ball Indentation Hardness | 40.0 | N/mm² | ISO 2039-1 |
Hardness (15-s Value) | 60 - 65 | shore D | ISO 868 |
Dynamic Coefficient of Friction | 0.2 | — | — |
Wear (Sand-Slurry) | 100.0 | % | ISO 15527 |
Value | Units | Test Method / Conditions | |
Melting Range DSC (10K/min) | 130 - 135 | °C | ISO 3146 |
Coefficient of Thermal Expansion (23°C - 60°C) | approx. 2×10⁻⁴ | K⁻¹ | ISO 11359 |
Thermal Conductivity | 0.4 | W/mK | ISO 52612 |
Usage Temperature | max. 80 | °C | — |
Usage Temperature | min. -200 | °C | — |
Usage Temperature Short Term | 120.0 | °C | — |
Value | Units | Test Method / Conditions | |
Surface Resistivity | min. 10¹² | Ohm | IEC 60093 |
Regulatory & Compliance
- Certifications & Compliance
- Regulations
- EU-plastics directive 10/2011/EG
- FDA-directive 21CFR177.1520
- FDA-directive 21CFR178.3297