SPF 30 Sun Spray
Formulation
Name | Ingredient | Supplier | % |
---|---|---|---|
Phase A | |||
Sucragel AP Glycerin & Water & Sucrose Laurate & Alcohol & Sucrose Myristate | Glycerin & Water & Sucrose Laurate & Alcohol & Sucrose Myristate | — | 5.4 |
Phase C | |||
Water Aqua | Aqua | — | 70.4 |
Sucrathix VX Microcrystalline Cellulose & Cellulose gum & Xanthan gum | Microcrystalline Cellulose & Cellulose gum & Xanthan gum | — | 1.0 |
Phase B | |||
Escalol 517 Butyl Methoxydibenzoylmethane | Butyl Methoxydibenzoylmethane | — | 2.0 |
Escalol 557 Ethylhexyl Methoxycinnamate | Ethylhexyl Methoxycinnamate | — | 7.5 |
Escalol 567 Benzophenone-3 | Benzophenone-3 | — | 3.0 |
Vitamin E Acetate Vitamin E Acetate | Vitamin E Acetate | — | 0.1 |
Paraffin Oil Paraffin Oil | Paraffin Oil | — | 4.0 |
Eusolex 6300 4-Methyl Benzlidenecamphor | 4-Methyl Benzlidenecamphor | — | 1.5 |
Lexfilm Sun Polyester-7 (and) Neopentyl Glycol Diheptanoate | Polyester-7 (and) Neopentyl Glycol Diheptanoate | — | 1.5 |
Phase D | |||
Dermasoft 1388 ECO Glycerin, Aqua, Sodium levulinate, Sodium anisate | Glycerin, Aqua, Sodium levulinate, Sodium anisate | — | 3.5 |
Dermofeel PA-3 Sodium Phytate, Aqua | Sodium Phytate, Aqua | — | 0.1 |
Preparation:
Heat the Sucragel AP to 70°C
Mix together phase B and heat to 70°C
Slowly, add phase B into the Sucragel under propeller mixer at quite a fast speed to form a gel.
Disperse the Sucrathix in the water. Heat this mixture up to 70°C.
Add the gel made with phase A & B into phase C using a homogeniser
Cool down to room temperature and finally add phase D.
Notes:
On Stability at 45°C.
N.B Sucragel AP can be replaced with Sucragel CF
The preservative system in this formulation has not been challenge tested. Other systems can be used.
White thin liquid
- Markets
- Applications
- Application Format
- Sun Care Applications