HydroPrime® 200

Identification & Functionality

Product Type

Primer

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Primers & Sealers

Features & Benefits

Labeling Claims

Asbestos-free,

Low VOC

Ready-to-Use Product Features

Fast Curing,

Good Adhesion,

High Capacity of Penetration,

Low VOC,

Medium Gloss

Features

• Low Volatile Organic Compounds (VOC) 190 g/L max.
• Cures quickly, typically less than an hour.
• Can be applied by roller, brush or airless spray equipment.
• Cured asphalt film meets ASTM D 41 requirements.
• Non-Asbestos
• Penetrates and seals dry felts, dusty surfaces and rusty metal.

Applications & Uses

Markets

Paints & Coatings

Applications

Paints & Coatings — Building & Construction

Other Building & Construction Applications

Application Method

Brush,

Roller,

Spray

Compatible Substrates & Surfaces

Metal

Application & Uses

Uses:

• Creates a bondable surface over aged BUR.
• Thoroughly penetrates and binds dusty, chalking surfaces.
• Improves adhesion over metal surfaces.

Applications:

• Ready to apply.
• Do not heat.
• Do not thin.

Surface Preparation

All work surfaces should be in sound condition, free of dirt, debris, loose and/or embedded gravel, unattached coatings & membranes, and other contaminants that may interfere with a good bond.

Application Directions

• Apply to the properly prepared surface at a rate of 1/2 to 3/4 gallon per square using a medium nap roller, brush or airless spray equipment.
• Drying time at 70°F and 50% relative humidity is approximately one hour to touch and 4 hours to recoat.

Application Precautions

• Do not use on 100% rubber or plastic substrates.
• Do not use on products containing coal tar.
• Do not use where this product may come in contact with potable water.
• Do not thin.
• Do not freeze.
• Exterior use only.

Clean Up

• Immediately rinse/flush equipment and tools with water after use.
• If the material has cured, clean with mineral spirits, exercising all flammable liquid precautions.
• Use waterless hand cleaner on the skin.

Properties

Color

Black

Typical Properties

	Value	Units	Test Method / Conditions
Weight Per Gallon	7.9 - 8.1	lbs.	D2939
Solids by Weight	40 - 44	%	D6511
Solids by Volume	40 - 44	%	D6511
Viscosity	200 - 500	cps	Brookfield RVT, # 3 Spindle
pH	8 - 10	—	—
Flash Point	min. 105	°F	PMCC
Drying Time (Touch, 70°F/50% R.H.)	1.0	Hour	—
VOC	max. 190	gm/liter	EPA Method 24A

Regulatory & Compliance

Compliance

Cured asphalt film meets ASTM D 41 requirements.

Packaging & Availability

Packaging Type

Drums,

Pails

Packaging

• 5-gallon pails (42 lbs)
• 55-gallon drums (485 lbs)

Storage & Handling

Shelf life

1 year (70°F, 50% R.H.)