Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Low Volatile Organic Compounds (VOC) (20 g/L).
- Cures quickly, typically less than an hour.
- Can be applied by brush, roller or airless spray equipment.
- Water-based, allowing easy clean-up.
- Non-Asbestos.
Applications & Uses
- Compatible Substrates & Surfaces
- Application & Uses
Uses:
- Required over EPDM and Hypalon surfaces, prior to the application of white (or colored) elastomeric roof coatings, to ensure adequate adhesion of the surface coating.
- Can also be used over metal roofs.
Applications:
- Ready to apply.
- Do not heat.
- Do not thin.
- Surface Preparation
- Hypalon roof systems must weather the equivalent of 30 summer days prior to cleaning, priming and coating, to ensure optimum performance.
- All work surfaces should be in sound condition, free of dirt, debris, unattached coatings & membranes, biological growth* (mold, mildew and algae) and other contaminants that may interfere with a satisfactory bond.
- * Use Fortress® QuiKleen™ to eliminate biological growth and remove residual surface oils from the surface.
- Application Directions
Apply to the properly prepared surface at a rate of 1/4 to 1/2 gallon per square using a medium nap roller or airless spray equipment (a 0.015 - 0.021 inch spray tip orifice and a minimum operating pressure of 500 psi are recommended).
Do not puddle or over-apply.
Two coats, each applied at 1/2 the total recommended coverage rate and perpendicular to one another are required to ensure optimum performance.
Re-coat when the primer has dried and can withstand foot traffic (about 1 - 2 hours).
- Application Precautions
- Do not use on tar-based substrates.
- Do not freeze.
- Do not use where this product may come in contact with potable water.
- Do not thin.
- Exterior use only.
- Do not apply if heavy rain or dew is expected or if temperatures are expected to drop below 50°F within 6 hours of application.
- Clean Up
- Immediately rinse/flush equipment and tools with water after use.
- If the material has cured, clean with mineral spirits, exercising all flammable liquid precautions.
- Use waterless hand cleaner on the skin.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Weight Per Gallon | 10.7 - 10.9 | lbs. | D2939 |
Solids by Weight | 55 - 60 | % | D2939 |
Solids by Volume | 42 - 47 | % | D2697 |
Viscosity | 3000 - 5000 | cps | Brookfield RVT, # 4 Spindle |
pH | 8 - 10 | — | — |
Drying Time (Touch, 70°F/50% R.H.) | 1 - 2 | Hour | — |
VOC | max. 20 | gm/liter | EPA Method 24A |
Cured Filmed Thickness (1gal/100ft²) | 5 - 7 | mils | — |
Packaging & Availability
- Packaging
- 5-gallon pails (53 lbs.)
- 55-gallon drums (585 lbs.)
Storage & Handling
- Shelf Life (70°F/50% R.H.)
- 1 year