Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Cold applied by brush or airless spray equipment.
- Overlapping aluminum pigment layers form a tough, ozone and UV-resistant barrier.
- Preserves surfaces from costly deterioration, extending the useful service life of the roof system.
- Reduces cooling energy consumption by reflecting the sun’s IR energy away from the roof surface.
- Non-Asbestos.
Applications & Uses
- Compatible Substrates & Surfaces
- Application & Uses
Uses:
- Forms a highly reflective, protective barrier over BUR, modified bitumen membranes and metal roofing surfaces.
Applications:
- Ready to apply.
- Do not heat.
- Do not thin.
- Surface Preparation
- All work surfaces must be clean, dry, free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membranes, and other contaminants that may result in a surface that is not sound.
- All necessary repairs must be completed before application to ensure optimum performance.
- Extremely dusty or dry surfaces should be primed with Fortress® # 5302 Asphalt Primer or Fortress® #5085 HydroPrime™ 200.
- Application Directions
- Stir thoroughly prior to and periodically during application.
- Mechanical agitation/mixing is recommended, especially for drums.
- Apply to the properly prepared surface at a rate of 1 - 2 gallons per square.
- Application Precautions
- Do not use with or on 100% rubber or plastic substrates.
- Do not use on or with products containing coal tar, unless primed with fortress® # 5606 tarbloc ap.
- Do not apply to damp or wet surfaces.
- Do not apply when temperatures are expected to fall below 50ºf or when moisture is expected within 24 hours of application.
- Do not use where this product may come in contact with potable water.
- Do not thin.
- Exterior use only.
- Clean Up
- Immediately rinse/flush equipment and tools with mineral spirits after use, exercising all flammable liquid precautions.
- Use waterless hand cleaner on the skin.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Weight Per Gallon | 8.5 - 9 | lbs. | D6511 |
Solids by Weight | 72 - 77 | % | D6511 |
Solids by Volume | 68 - 73 | % | D6511 |
Viscosity (200rpm) | 500 - 700 | grams | Stormer |
Flash Point | min. 105 | °F | PMCC |
Drying Time (Touch, 70°F/50% R.H.) | 1.0 | Hour | - |
VOC | max. 450 | gm/liter | EPA Method 24A |
Regulatory & Compliance
- Compliance
- Meets current Volatile Organic Compounds (VOC) regulations.
- ASTM D2824, Type III, Metro Dade, UL Classified.
Packaging & Availability
- Packaging
- 5-gallon pails.
- 55-gallon drums.
Storage & Handling
- Shelf Life (70°F/50% R.H.)
- 1 year