Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Characterestics
Its broad molecular weight distribution and density successfully combine excellent 'Rrforrnance at high extrusion rates with high film strength and rigidity.
Tubular films of ADVANCE™ EE-4811-AAH Resm are recommended for tugh strength grocery sacks. shopping bags and notion and millinery bags. The excellent drawdown charactenstics of this product production of high-quality thin films for multiwall sack liners and replacements for thin paper products. The combination of strength and drawdown makes this restn Ideal for downgauging in many applications. Films are readily treated and printed to give high-quality graphics. ADVANCENE'" EE-4811 -AAH Resm is compatible with color concentrates. thus pernuttlng the prcxiuction of a variety of colored films that serve as protective and attractive decorative wraps.
- Main characterestics
• Hexene High density Resin.
• High film strength.
• Excellent drawdown.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Film Properties
- Processing Information (Extrusion)
| Value | Units | Test Method / Conditions | |
| Density | 0.948 | g/cm3 | ASTM D792 |
| Melt Index (190ºC/1.6 kg) | 11 | g/10min | ASTM D1238. ISO 1133 |
| Value | Units | Test Method / Conditions | |
| Flexural Modulus- 1% Secant | 814 | Mpa | ASTM D790. ISO 178 |
| Value | Units | Test Method / Conditions | |
| Vicat Softening Temperature | 124 | ºC | ASTM D1525. ISO 306 |
| Melting Temperature (DSC) | 132 | ºC | ASTM D3418. ISO 3146 |
| Value | Units | Test Method / Conditions | |
| Film Thlckness - Tested | 12.7 | µm | — |
| Film Puncture Energy | 1.2 | J | — |
| Tensile Strength at MD Yield 0.500 mil (12.7 µm) | 27.6 | Mpa | ASTM D882 |
| Tensile Strength at TD Yield 0.500 mil (12.7 µm) | 24.1 | Mpa | ASTM D883 |
| Tensile Strength at MD Break. 0.500 mil (12.7 µm) | 55.2 | Mpa | ASTM D884 |
| Tensile Strength at TD Break. 0.500 mil (12.7 µm) | 53.8 | Mpa | ASTM D885 |
| Tensile Elongation MO: Break, 0500 mil (12.7 µm) | 270 | % | ASTM D886 |
| Tensile Elongation TO. Break. 0500 mil (12.7 µm) | 350 | % | ASTM D887 |
| Tensile Elongation Dart Drop Impact (0500 mil (12.7 µm)) | 150 | g | ASTM 1709A, ISO 7765 |
| Elrnendorf Tear Strength at MD: 0.500 mil (12.7 µm) | 70 | g | ASTM 1922, ISO 6383-2 |
| Elrnendorf Tear Strength at TD 0.500 mil (12.7µm) | 150 | g | ASTM 1922, ISO 6383-2 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 216 | ºC | — |
Regulatory & Compliance
- Recycling
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
Technical Details & Test Data
- Extrusion Notes
Fabrication Condition for BLown Film;
• Screw Size: 2.5 in. (63.5mm); 30:1 ratioL/D
• Crew Type: Grooved
• Die Gap: 40 mil (1 mm)
• Melt Temperature: 420T (21S•C)
• Output: 6 lb/hr/in. ot die circumference
• Die Diameter. 4 in.
• Blowup Ratio: 4 to 1
• Screw Speed: 80 rpm
• Frost Line Height: 30 in. (760mm)
Safety & Health
- Safety
The product is not classified as a hazardous mixture.
Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed. Inhalation of dust should be avoided as it may cause irritation of the respiratory system. small amounts of fumes are generated during prcHü•essing of the product. Proper ventilation is therefore required. A Safety Information Sheet is available on request. Please contact your ETHYDCO representative for more details on various aspects of safety, recovery and disposal of the product.
Packaging & Availability
- Packaging Type
- Regional Availability
- Availability
This product is supplied in 25 kg bags in secured pallets of 60 bags (1.5CK) MT net).
It is also supplied in jumbo bags of 1000 kg capacity.
Storage & Handling
- Storage
The product should be stored in dry conditions at temperatures below 500C and protected from UV-light. Improper storage can initiate degradation, which results in (Ylour generation and color changes and can have negative effects on the physical properties of this product. More information on storage can be found in safety Information Sheet for this prcxiuct.