Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Sansin Wood Sealer is a low VOC water-borne protective wood treatment that aggressively repels water while allowing wood to breathe. Over a short time, the wood will weather uniformly to a beautiful silver gray tone. Wood Sealer provides exceptional protection and won’t break down with exposure to sunlight, retaining its water-repellency and protecting against weathering and wood rot. Because it erodes gently with time, maintenance is easy – just apply a fresh coat of Wood Sealer.
- Wood Sealer is designed to bring dimensional stability to wood by reducing moisture absorption up to 74% during wetting periods.
- Wood Sealer dries clear, will not peel and can be used for interiors as well as exteriors. Wood Sealer is ideal for log homes, decks, fences, wood shingles, gazebos, yard furniture and wood siding.
- Features
- Environmentally friendly
- No organic solvents
- VOC Compliant
- Penetrates the substrate
- Reduces water absorption
- Reduces swelling of wood
- Water repellent
- Breathable
- Odorless
- Clear
- Non-slip surface coating
- Ready to use; Ready for application
- Clean up with soap and water
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cleanup
- Water
- Applications
Recommended for use on new and old wood surfaces such as decks, fences, siding, timbers and roofing shingles or shakes.
- Preparation
- Inspect wood surfaces for defects and make any necessary repairs.
- Use Sansin cleaner and/or wash the entire surface with a minimum 3000 PSI pressure washer using clean water.
- Smooth or millglazed surfaces must be sanded well with 60-80 grit paper using variable speed random orbital sanders.
Working Procedure
- Stir well before and during the application process.
- Test formula on an inconspicuous wood surface to ensure proper color and penetration.
- Apply in proper conditions with an ideal temperature of 21ºC (70ºF) and relative humidity of approximately 50%.
- Do not apply if rain or near freezing temperatures are expected.
- Saturate the wood surface.
- Brush out any puddles and runs.
- Do not apply on wood that is warm to touch or in direct sunlight.
- Continually check the surface; wipe up all puddles and brush out runs.
- Always read published directions of use prior to beginning any project.
Properties
- Appearance
- Hazy white
- Odor
- Low
- Diluent
- Water
- Characteristics
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.0 | — | — |
Density | 8.3 | lbs/gal | — |
pH | min. 9 | — | — |
Viscosity (Brookfield #1, 60RPM, 20°C) | 05 - 06 | cPs | — |
Solvents | None | — | — |
Freezing Point | -1.0 | °C | — |
Drying Time (20ºC) | 48.0 | Hours | — |
Drying Time (Between Applications, 20ºC) | 0.5 - 5 | Hours | — |
Coverage Pending to Penetration | 100 - 200 | sq.ft./ US gal | — |
VOC | max. 10 | g/L | — |
Safety & Health
- Warning
Keep out of reach of children, if swallowed immediately drink two glasses of milk or warm water. Do not induce vomiting. Call physician immediately. Avoid contact with skin or eyes; flush with soap and water. Avoid breathing of vapor or mist. Wear a properly fitted NIOSH approved respirator. The information contained in this document is given in good faith based on our current knowledge. The use of the product is beyond the control of The Sansin Corporation, and no guarantees, expressed or implied, are made as to the result to be obtained if not used in accordance with the published Directions for Use. The Sansin Corporation does not assume any legal responsibility for use or reliance on same. This information must on no account be used as a substitute for necessary field tests, which alone can ensure that the product is suitable for the expected use. Before using any product, read its label.
Packaging & Availability
- Packaging
Gallons, 5-Gallon pails.
Storage & Handling
- Storage
- Shelf life when stored in ideal conditions is 3 years. Store at temperatures of between + 10ºC and + 30ºC (50ºF and 86ºF). Keep containers tightly closed.
- Longer drying time needed in high humidity or low temperature, Keep from freezing.