Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Advantages
- Cost effective
- Extremely rapid cure formulation
- Low viscosity promotes excellent adhesion to concrete substrates
- Easy 2 to 1 mix ratio (by volume)
- Ideal for fast-track patching
- Low odor during application & cure-can be applied inoccupied facilities
- VOC compliant with ALL U.S. regulations
- Can be factory or field pigmented using Thermal-Chem’s Universal Pigment
- Limitations
- Can be applied in ambient temperatures as low as 40 °F (when applied in warmer temperatures this product will cure very quickly)
- Do not apply at less than 10 mils or 160 square feet per gallon
- Do not thin this product
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Product Application
Apply #727 ArmorPrime Ultra-Fast only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
- Surface Preparation
Apply #727 ArmorPrime Ultra-Fast only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
Solids | 100.0 | % | — |
VOC Content | 0.0 | g/L | — |
Viscosity (Clear) | 300 - 500 | cps | — |
Viscosity (Pigmented) | 700 - 950 | cps | — |
Hardness | 78 - 80 | Shore D | ASTM D2240 |
Working Time (70°F) | 10 - 15 | minutes | — |
Dry to Touch (70°F) | 2 - 3 | hours | — |
Dry to Touch (55°F) | 5 - 6 | hours | — |
Recoat Time (after 24 hours lightly sand product, 70°F) | 2 - 23 | hours | — |
Open for Light Traffic (70°F) | 24 | hours | — |
Safety & Health
- Product Handling
Avoid contact of uncured material to skin and eyes, proper PPE should be used during the handling of this product. Clean skin with soap and water. Tools and equipment should be cleaned with a solvent such as xylene or lacquer thinner. Refer to the Safety Data Sheet for additional information
Packaging & Availability
- Packaging
Kit sizes available are 1, 3, 15 gallons