Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Thermal-Chem Corporation Company Logo

ArmorPrime WB (1080)

1 of 4 products in this brand
ArmorPrime WB (1080) is a two-component water-based epoxy that acts as a multi-functional primer or as a sealer. A great choice to seal older concrete surfaces to prevent out-gassing and air bubbles from transmitting through subsequent coatings. When applied in two or more coats, ArmorPrime-WB #1080 produces a very durable sealer coat. (For interior use only).

Product Type: 2K (2 component) Coating, Epoxy Coating, Primer, Sealer, Waterborne Coating

Compatible Substrates & Surfaces: Concrete

Features: Cost Effective, Durable, Fast Cure, Low Odor, Low Outgassing, Low Viscosity

Application Method: Brush, Roller, Wipe

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

2K (2 component) Coating,

Epoxy Coating,

Primer,

Sealer,

Waterborne Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Primers & Sealers

Features & Benefits

Labeling Claims

VOC-free

Ready-to-Use Product Features

Cost Effective,

Durable,

Fast Cure,

Low Odor,

Low Outgassing,

Low Viscosity

Advantages
  • Cost-effective
  • Cures extremely fast to allow quicker return to service
  • VOC compliant with ALL U.S. regulations
  • Extremely low odor during application & cure - can be applied in occupied facilities
  • VOC compliant with ALL U.S. regulations
  • Very low viscosity provides deeper penetration into even the smallest voids in concrete
  • Can be applied to “Green” concrete
Limitations
  • Do not apply in ambient temperatures below 50° F or above 80° F
  • Do not apply with relative humidity above 80%
  • Do not thin this product with any solvent
  • Do not tint this product

Applications & Uses

Markets

Building & Construction

Applications

Building & Construction — Decorative Materials & Finishes

Decorative Paints, Coatings & Stains

Application Method

Brush,

Roller,

Wipe

Compatible Substrates & Surfaces

Concrete

Product Application

Apply ArmorPrime-WB #1080 with a squeegee, brush, or high-quality non-shed roller. Only mix the amount of product that can be properly applied within 20-35 minutes. Once thoroughly mixed this product should be placed on the surface and NOT LEFT IN THE MIXING BUCKET.

Surface Preparation

Apply ArmorPrime-WB #1080 only to clean and sound substrates. Mechanical preparation by means of shotblasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Solids50.0%-
VOC Content0.0g/L-
Viscosity200 - 300cps-
Hardness75 - 80Shore DASTM D2240
Working Time (70°F)25 - 35minutes
Dry to Touch (70° F)1 - 3hours
Recoat Time (after 24 hours lightly sand product, 70°F)2 - 23hours
Open for Light Traffic (70°F)24hours

Safety & Health

Product Handling

Avoid contact of uncured material to skin and eyes, proper PPE should be used during the handling of this product. Clean skin with soap and water. Tools and equipment should be cleaned with a solvent such as xylene or lacquer thinner. Refer to the Safety Data Sheet for additional information.

Packaging & Availability

Packaging

Kit sizes available are 1, 3, 15 gallons