Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Features & Benefits
- Complies with FDA regulations for potable water applications conforms to paragraph 21CFR173.25 of the Food Additives Regulations of the F.D.A.
- NSF/ANSI-61 Certified for Material Safety
- Controlled Particle Size: 16 to plus 50 mesh range; gives a lower pressure drop while maintaining superior kinetics.
- Superior Physical Stability: 90% plus sphericity and high crush strengths together with carefully controlled particle distribution provide greater resistance to bead breakage while maintaining low pressure drops.
- Low Color Throw
Applications & Uses
- Markets
- Applicable Processes
- Operating Capacity
Sodium Chloride (NaCl) Regeneration
The sodium cycle operating capacity TIGG CAT for hardness removal at various regeneration levels with an influent calcium/magnesium ration of 2/1 and a hardness level of 500 ppm, as CaCO3, is shown in the following table.
Pounds NaCl/cu.ft. Capacity Kilograins/cu.ft.
5 20 7.5 25.4 10 29 10 33 Potassium Chloride (KCI) Regeneration
The potassium cycle operating capacity of TIGG CAT for hardness removal at various regeneration levels with an influent calcium/magnesium ration of 2/1 and a hardness level of 500 ppm, as CaCO3, is shown in the following table:
Pounds NaCl/cu.ft. Capacity Kilograins/cu.ft.
5 16.6 7.5 21.8 10 26.6 10 31.2
Properties
- Appearance
- Tough spherical Beads
- Insoluble in
- water
- Physical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Polymer Structure | Styrene Crosslinked with DVB | - | - |
Functional Group | R - (SO3) - M+ | - | - |
lonic Form (As Shipped) | Sodium | - | - |
Screen Size Distribution | 16 - 50 | - | - |
pH | 0 - 14 | - | - |
Sphericity | min. 90 | % | - |
Uniformity Coefficient | approx. 1.6 | - | - |
Water Retention (Sodium Form) | 46 - 50 | - | - |
Shipping Weight (Sodium Form) | 50 lbs./cu.ft. | - | - |
Total Capacity (Sodium Form) | min. 1.90 | meq/ml | - |
Value | Units | Test Method / Conditions | |
Maximum Temperature (Sodium Form) | 250.0 | °F | - |
Minimum Bed Depth | 24.0 | inches | - |
Backwash Rate (Bed Expansion) | 50 - 75 | % | - |
Regenerant Concentration (NaCl or KCI) | 10 - 15 | % | - |
Flow Rate | 0.5 - 1.5 | gpm/cu.ft. | - |
Contact Time | min. 20 | minutes | - |
Level | 4 - 15 | pounds/cu.ft | - |
Displacement Rate | Same as Regen Flow Rate | - | - |
Volume | 10 - 15 | gallons/cu.ft. | - |
Volume | 35 - 60 | gallons/cu.ft. | - |
Fast Rinse Rae | Same as Service Flow Rate | - | - |
Service Flow Rate | 1 - 10 | gpm/cu.ft. | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging
Standard packaging is in TIGG CANSORB pre-engineered vessels.