Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Applications
Designed to lubricate critical parts such as:
- Fasteners
- Military Equipment
- Hydraulic Fittings
- Weapons
- Bearings
- Splines, Shafts
- Gears
- Nuts & Bolts
- Cure Cycle (Mil-PRF-46010)
Air dry for at least 30 minutes or flash cure at 65ºC to 70°C for 10 to 30 minutes. Then bake at 204 ± 15°C for at least 1 hour or bake at 150 ± 15ºC for at least 2 hours.
The Cure Cycles are based on the “Part” Temperature not the “Oven” Temperature
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
Coverage (0.0005 inch) | 1500.0 | ft²/gal | - |
Lubricative Pigment | Molybdenum Disulfide | - | - |
Operating Temperature (Continuous) | 400.0 | °F | - |
Operating Temperature (Intermittent) | 500.0 | °F | - |
Recommended Thickness | 0.0002 - 0.001 | inch | - |
Salt Spray (0.001 inch) | 200.0 | hours | ASTM B117 |
Solvent | DI Water | - | - |
VOC Content | max. 42 | grams/liter | - |
Technical Details & Test Data
- Qualified To
MIL-PRF-46010G, Qualification Number: M-6025, TACOM
It also meets MIL-L-8937, AS 5272 Type III and AS1701 Class I & II along with the new Federal, State and local environmental regulations.
- Endurance (Wear Life) Data using the Falex Pin & V-block Tester
- 540 Minutes: When lubricant was cured at 180ºF for one hour and then 400ºF for 15 minutes.
- 485 Minutes: When lubricant was cured at 180ºF for one hour and then 350ºF for 25 minutes.
- PIN: SAE 3135, Rb 87-90
- Block: AISI-C1137, Rc 20-24
- Pretreatment: per ASTM D2625
- Speed: 290 RPM;
- Load: 1000 lb. Gage (Approx. 50,000 PSI)
- Fluid Resistance
Anti Icing Fluid MIL-A-8243 Pass Cleaning Compound, Solvent MIL-C-372 Pass Reagent Water ASTM D1193, Type III Pass Substitute Ocean Water ASTM D1141 Pass Hydraulic Fluid, Synthetic Base MIL-H-46170 Pass Turbine Fuel, Kerosene Type MIL-DTL-83133, JP-8 Pass Lubricating Oil, Synthetic Base MIL-PRF-23699 Pass Damping Fluid, Silicone Base VV-D-1078 Pass Lubricating Oil, Low Temp. MIL-L-14107 Pass Lubricant, Semi-Fluid MIL-L-46000 Pass Lubricant, Cleaner, Preservative MIL-PRF-63460 Pass Lubricant, All Weather MIL-PRF-85336 Pass
Packaging & Availability
- Packaging Type
- Packaging
Tiolube 20/20 can be purchased in bulk in Quarts, Gallons and 5 Gallon Cans.
Storage & Handling
- Shelf Life
- 1 Year