Products

Tiolube 29 is an extreme environment high temperature solid film lubricant. It can be used in hard vacuum, radiation, liquid oxygen, liquid hydrogen. Tiolube 29 is recommended for use on fasteners, sleeve bearings, rocket engine hot gas valves, jet engine shafts, bushings, etc. Tiolube 29 is also resistant to most organic solvents, skydrol, oils and degreasers. This lubricant may be applied on all metals by spraying, dipping, or brushing. Tiolube 29 meets the requirements of Mil-L-81329, NATO Code S-1737.

Alumazite ZY-138 is an aluminum filled corrosion inhibitive coating designed to prevent galvanic corrosion. It does not contain any chrome pigments. Alumazite ZY-138 has excellent adhesion to all metals and eliminates the commonly acknowledged dangers of hydrogen embrittlement, or diffusion stress cracking, as related to cadmium plating processes. Alumazite ZY-138 meets the requirements of NAS 4006, MIL-C-85614 and BMS 10-85.

T8E-H Grease is an anti-seize products having unique inorganic pigment and is designed to be used as an aid for the installation and removal of threaded fasteners which are exposed to temperatures up to 1400°F for long periods of time. T8E-H Grease is completely inorganic and do not contain any sulfur producing materials, nor any metallics, such as silver or nickel. T8E-H Grease is approved by aircraft engine manufactures, gas turbine, and steam turbine companies. T8E-H Grease is a heavier grease and is designed to replace graphite petrolatum grease (GE Spec A50TF201), especially for use at temperatures to 1400°F.

Z-329 is a single component, water base coating formulated to inhibit corrosion. This hard film, water-dispersing coating is designed specifically for application on the interior and exterior surfaces of the fuselage, wing, empennage and other areas, where corrosion from water and condensation have been a traditional threat. Z-329 is a non-flammable, fast drying coating with excellent adhesion that penetrates to protect fasteners, joints and faying surfaces. Unlike wax or oils, Z-329 is environmentally safe and can be sprayed "on-line" with a high volume, low pressure spray unit, and without the need of a spray booth. Z-329 can be applied after all other customer finishes, specification primers, top coats and sealants have been applied and cured.

Alumazite ZM-40 is a Low VOC, aluminum filled corrosion inhibitive coating that does not contain any Chromate pigments. Alumazite ZM-40 has excellent adhesion to all metals and it eliminates the commonly acknowledged dangers of hydrogen embrittlement or diffusion cracking, as related to cadmium plating processes. Alumazite ZM-40 has been tested and proven in such areas as automotive, marine, aircraft, missiles, farm equipment, fasteners, etc. and it can be applied to a wide variety of materials.

Tiolubee 614-T9B is an inorganic bonded dry film lubricant utilizing a specially formulated composition of oxides. Its primary function is to prevent seizing of threaded fasteners. Its high temperature capabilities offer a unique combination of performance benefits not available with other solid film lubricants. Tiolube 614-T9B is designed for use in jet engine applications and is used on A-286, Inconel and Waspaloy fasteners to replace silver at 1400°F. Because Tiolube 614-T9B contains an inorganic binder and specially formulated particulate solid film lubricant pigments, it does not deteriorate at 1400°F for long periods of time and it aids in the removal of threaded fasteners.