Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Compatible Substrates & Surfaces
- Commercial Applications
Armorguard XD coatings can be formulated in a wide range of glosses and selected colors depending on exterior exposure and warranty conditions. Coating is applied over our Superprime™ 300 primer system to improve adhesion and corrosion resistance and applied to variety of metal substrates including: HDG, ZnAl, aluminum and stainless steels. Armorguard XD is an excellent choice for applications that require the ultimate combination of long term durability, stain and scratch resistance, and excellent stamping and embossing performance.
- Recommended End Use Applications
Garage Doors/ Roll-up Doors, AG Sheets, Barn and Storage Facilities, Building Panel and Sidewall, Insulated Panels, Service Station Canopies, Specialty HVAC, Awning Accessories.
Properties
- Appearance
- Textured Surface
- Performance Properties
- Humidity Resistance
100% RH Aluminum: No blisters or loss of adhesion
1,000 Hours HDG: Less than 5% #8 size blisters and no loss of adhesion
ASTM D 2247 - Salt Spray Resistance
1,000 Hours Aluminum: Few #8 size blisters, no more than 1/32” creepage from scribe
ASTM B 117 Primed HDG and Galvalume: Less than 5% #8 size blisters, no more than 1/8” creepage from scribe
- Emmaqua - Arizona
2,500,000 Langleys Color: No more than 7AE at 10 years
ASTM D 2244 Chalk: No less than 6 at 10 years
ASTM D 4214
| Value | Units | Test Method / Conditions | |
| Cross Hatch Adhesion | No loss of adhesion | - | ASTM D 3363 |
| Impact Resistance | min. 60 | inch lbs. | ASTM D 4145 |
| Pencil Hardness | F-2H | - | ASTM D 3363 |
| Specular Gloss (60°) | 10 - 95 | - | ASTM D 523 |
| T-Bend | 1T-2T | - | ASTM D 4145 |
| Water Immersion | Pass | - | ASTM D 870 |