company tower banner
Titan Laboratories Company Logo

Cleanup Solvent-22™

1 of 1 products in this brand
Cleanup Solvent-22™ replaces chlorinated solvents. It dries quickly and does not need a water rinse. It’s ideal for adhesive removal, carpet cleaning, removing chewing gum, tar, tree pitch grease and oils from all surfaces. Removes black scuff marks from wood or vinyl floors and baseboards. Cleanup Solvent-22™ dries quickly and leaves no residue when dry. Outstanding safety rating and performance. Contains no chlorinated fluorocarbons and is safe to the user and the environment. Since CS-22 dries quickly, it is ideal for cleanup of small stains or areas.

Product Type: Adhesive Remover, Cleaner, Degreasers, Tar Cleaner

Application Area: Carpets, Equipment, Floor, Tanks

Compatible Substrates & Surfaces: Fibers & Fabrics, Wood

Features: Degreasing, Fast Drying, High Flash Point, High Performance, Low Toxicity

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Features & Benefits

Cleanup Solvent 22 Dissolves

  • Adhesives
  • Tape
  • Residue
  • Labels
  • Glue
  • Cosmetics
  • Grease
  • Gum
  • Inks
  • Latex
  • Oils
  • Permanent Marker
  • Resins
  • Heel Marks
  • Crayon
  • Decals
  • Tree Pitch
  • Waterproofing
  • Waxes
  • Window Caulk

Cleanup Solvent 22 features

  • Fast-Drying
  • Non-Oily
  • Pleasant Fragrance
  • Low NFPA Toxicity 1-2-0
  • High Flashpoint
  • Meets MilSpec PD-680
  • Leaves no Residue

Applications & Uses

Markets
Application Method
Compatible Substrates & Surfaces
Usage Instructions

Usage Instructions

Apply

Use full strength on a dry surface. Use sparingly. (Do not apply to carpets without reading special instruction flyer).

Agitate

You can use an appropriate scrubber or tool. This would include a rag, terry cloth, burlap, nylon or mesh scrub pad, steel wool, scrub brush (e.g., bristles of nylon, polypropylene, or brass) Teflon™ or nylon scraper (such as a fry pan scraper, body filler applicator or old credit card).

Dry

Wipe dry or allow to dry by natural air convection. Or use a heat gun, hair dryer, compressed air, a squeegee, or isopropyl alcohol rinse.

Remove Adhesive Labels, Tape

You can remove markers, tape, self-adhesive labels, appliques and stickers of all kinds. Just apply Cleanup Solvent 22 to the adhesive and wait a few minutes. If you can pull off the vinyl face of the tape or sticker, the Cleanup Solvent 22 will dissolve the adhesive quickly. Otherwise you have to wait until the adhesive dissolves as the Cleanup Solvent 22 migrates under the plastic label face. When you apply Cleanup Solvent 22 to dried masking tape or paper labels, the Cleanup Solvent 22 will soak through to the adhesive. Give it time to work.

Clothing Stains

When you get tar, grease, oil or mastic on your clothes you can usually clean this stain by pre-spotting and washing. Simply spray Cleanup Solvent 22 on the stain, rub the fabric together to dissolve the stain

Tape Residue

Remove tape or adhesive residue, whether dried or tacky, including sun-cured tape. Some tapes that can be removed with Cleanup Solvent 22: Cellophane. Cloth, Double-sided, Duct, Gaffer. Glass filament, Lane marker, Magic", Masking, Pin Striping, Safety, Packaging, Vinyl and lots more.

Labels, Decals And Stickers

Address labels, Bumper stickers. Decals, Hazard labels. Name plates, Price stickers, Product labels, Safety inspection stickers, Signs. Truck and airplane decals. etc. First remove the face material if possible. A heat gun or hair dryer in a corner may help you loosen the face material. Peel it off slowly, holding the material at right angles to the substrate while pulling firmly at a steady rate. Most of the adhesive may come off with the face stock if the procedure is done slowly enough. If the decal or bumper sticker is on so tight that it cannot be grabbed, then apply a bead of Cleanup Solvent 22 to an exposed edge to begin dissolving the adhesive. If the face stock is aluminum or polyester, for example, you have to remove it to gain access to the underlying adhesive residue. Once you peel back a corner or an edge, apply more Cleanup Solvent 22, until you can grab the face stock and pull it off.

Converting And Label Manufacturing

Remove adhesive squeeze-out. Clean die and press plates, cleans Cutters, Slitters, Re-winders. Cylinders. Rollers, Screens, Knives. Die inserts, Cores. Mounting tape, Lab equipment. Applicators, Glue hoses. Fountain keys. Tanks, Benches, Floors. Test beds, etc. Clean Sticky resins. Cellulose plastic, PVA Binder. Plastic dust, Ink spills and other difficult-to-clean materials.

Properties

Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Flashpoint105.0°F
NFPA Rating2000-01-02
CFC ContentNo
Skin IrritantNo
Storage RequirementsNo
Low VocExempt
Leaves ResidueNo

Regulatory & Compliance

Chemical Inventories

Packaging & Availability

Packaging Type
Availability

 

Available in pints, quarts, gallons, 5-gallon pails, and 55 gallon drums.