Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Type
- Blend of polymer emulsions
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Environmentally safe
- Wet, frozen, or treated lumber
- Offers freeze/thaw stability
- Cleans easily with water in wet state
- Cartridge & carton contain post-consumer recycled material
- Waterproof
- Strong durable bond
- Bonds most materials
- Interior/exterior
- VOC-compliant
Applications & Uses
- Markets
- Application Method
- Recommended For
Demanding interior/exterior construction, installation and repair projects.
- Compatible Materials
Common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber.
- Directions
Preparation : Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application: Cut tip on slant for 1/4” to 3/8” bead. For subfloors, cut tip straight across. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Adhere materials within 15 minutes or before skinning of adhesive occurs. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has dried. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
Cleanup : Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.
Coverage
Size 1/8” bead 1/4” bead 3/8” bead 10 Oz. Cartridge 129 ft. 30 ft. 14 ft. 28 Oz. Cartridge 355 ft. 86 ft. 39 ft. Trowel Coverage : 40-50 sq.ft. per gallon using a v-notch trowel with notches 3/16” wide x1/4” deep and spaced 1/2” center to center.
- User Tips
Not designed for continuous submersion. Do not adhere one non-porous material to another since this will slow or prevent drying. Not recommended for use with mirrors.
Properties
- Color
- Physical Properties
- Technical Data
Value | Units | Test Method / Conditions | |
Solids | 75.0 | % | — |
Viscosity | 75000.0 | cps | — |
pH | 5.0 | — | — |
VOC | max. 50 | g/L | — |
Weight/Gallon | 11.36 | lbs. | — |
Flash Point | min. 200 | °F | — |
Freeze/Thaw Stability | Stable | — | — |
Value | Units | Test Method / Conditions | |
Application Temperature | 40 to 100 | °F | — |
Service Temperature | 0 to 120 | °F | — |
Working Time (1/4” bead) | 20.0 | minutes | — |
Regulatory & Compliance
- Specifications & Certifications
Exceeds APA AFG-01, ASTM D3498 and ASTM C557.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage Life
18 months in an unopened container above 40°F.