Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Uses
It is used in construction industry for sealing, filling, insulating, fixing and mounting (of window and door frames). Tekapur Universal Foam hand held is a one-component polyurethane foam hardening by air humidity.
- Application
Surfaces should be clean, free of dust, grease and other impurities. Dry and porous surfaces should be moistened with water. The optimal temperature of can at work is room temperature. At lower temperature put the can into warm water with max. temperature of 40°C for about 20 minutes. Before use shake can thoroughly with the valve upside down. Remove the protection cap and screw on the nozzle with a tube. Turn the can with the valve upside down and apply pressure on the valve to activate the foam. You only have to fill the gap partially as the foam expands from 2 to 3 times. If you are filling a gap wider than 5cm, work in layers. Apply the second layer once the first one has hardened. You can speed up the process of hardening by spraying the foam with water. Once hardened, foam should be protected against UV light. Once the foam has hardened, cut it with a sharp knife and finish with plastering, sealing, covering, painting etc. If you do not use the entire can clean the valve with the TEKAPUR cleaner or acetone. Hardened foam can only be removed mechanically.
Properties
- Physical Form
- Typical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Volume (Free Foamed, 750g) | 28 - 32 | l | FEICA OCF TM 1003 |
Specific Density | 18 - 23 | kg/m³ | FEICA OCF TM 1019 |
Application Temperature (Surface) | min. +5 | °C | — |
Application Temperature (Can) | 20 - 25 | °C | — |
Tack Free Time | 5 - 10 | minutes | FEICA OCF TM 1014 |
Cutting Time | 25 - 30 | minutes | FEICA OCF TM 1005 |
Hardening Time (Depending on Temperature and Humidity) | 1.5 - 5 | Hours | — |
Temperature Resistance (From) | -40 to +90 | °C | — |
Dimensional Stability | max. ±5 | % | FEICA OCF TM 1004 |
Water Absorption | max. 1 | vol.% | DIN 53428 |
Tensile Strength | 0.06 - 0.08 | MPa | FEICA OCF TM 1018 |
Elongation at Break | 20 - 25 | % | FEICA OCF TM 1018 |
Value | Units | Test Method / Conditions | |
Flammability Class | F | — | EN 13501–1 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging
• Aerosol can of 750g
• Other packagings are available by agreement
Storage & Handling
- Storage
18 months (from +5°C to +25°C) or at lower temperatures for shorter periods of time (e.g. during transport). Higher temperatures shorten storage life. Store the cans in an upright position.