Products

Toray Toray Cetex® MC1200 is a thermoplastic bulk molding compound (BMC) based upon Cetex TC1200 PEEK thermoplastic uni-directional tape. Toray Cetex® MC1200 is offered on standard-modulus fibers lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product allows complex shapes to be made with varying wall thickness, integrated ribs, and reinforcing structure. Many composite compression molded parts are used to replace metal parts for weight savings or they replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1200-4A, PEEK, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Toray Toray Cetex® MC1322 New is a thermoplastic bulk molding compound (BMC) fabricated from Toray Cetex® TC1320 PEKK thermoplastic uni-directional tape. It is based on a semi-crystalline PEKK thermoplastic polymer and as such has excellent resistance to chemicals and solvents, while also offering excellent elevated service performance, good hot/ wet strength, and offers superior performance in flammability properties. Toray Cetex® MC1322 PEKK is offered on standard-modulus carbon fibers in lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product also allows complex shapes to be made with varying wall thicknesses, integrated ribs, and reinforcing structures. Compression molded parts are used to replace metal parts for weight savings.

Toray MS-1A is a high performance carbon fiber/epoxy resin compression molding system based on high-modulus carbon fiber. MS-1A compression molding compound yields unparalleled stiffness and high strength. MS-1A is qualified for space Applicationss. 138°C (280°F) Cure High-Modulus Compression Molding System

Toray Toray Cetex® MC1100 PPS is a thermoplastic bulk molding compound (BMC) based upon Toray Cetex® TC1100 PPS thermoplastic uni-directional tape. Toray Cetex® MC1100 PPS is offered on standard-modulus fibers in lengths of up to 25.4 mm (1”). Intermediate-modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. Many composite compression molded parts are used to replace metal parts for weight savings or replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1100-4A, PPS, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Toray MS-4H is a 25.4 mm (1”) carbon fiber/epoxy resin compression molding system using high strength standardmodulus (HS) carbon fiber. MS-4H is an excellent low-cost, high performance molding compound that has been qualified to military and commercial Applicationss. It has excellent out time stability and processes very well in medium-to-large heavy parts. 138°C (280°F) Fast Cure Standard-Modulus Compression Molding System

Toray MS-1H is a carbon fiber/epoxy resin compression molding system using a high-modulus PAN carbon fiber. This is an excellent high stiffness molding compound that has been qualified to military and commercial Applicationss. It has excellent out time stability and processes very well in small and thin cross-section parts. It is the performance alternative to MS-4H 25.4 mm (1”) molding compound. MS-1H is offered with 25.4 mm (1”) carbon fibers, or for smaller parts, a 12.7 mm (1/2”) fiber version is available. 138°C (280°F) Fast Cure Intermediate-Modulus Compression Molding System