Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- INCI Name
- Cosmetic Ingredients Functions
- Particle Shape
- Spherical Shape
- Technologies
- Product Families
- Composition
Polyurethane - 44 98% and Silica 2%
- Appearance
Features & Benefits
- Benefit Claims
- Product Highlight
FS-400 is a highly flexible urethane resin material that feels good when it’s applied on the skin and is a spherical powder that spreads over the skin with airy feeling.
It is the softest in the series and has excellent impact resilience.Good functional texturizer for not only makeup products but skin care products.- Features
- The softest and highest flexibility spherical powder in TP Powder seriesHigh-elasticity and airy texture
- Fine wrinkle pore hiding effect by light diffusion effect
- Wet process gives soft texture to products
Applications & Uses
- Markets
Properties
- Appearance
- White Fine Powder
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Average Particle Dimention | 12 - 18 | μm | - |
| Specific Gravity | 1.1 - 1.12 | - | - |
| Oil Absorption (Flaxseed oil) | 68.0 | ml/100g | - |
| Refractive Index | 1.5 | - | - |
| Bulk Specific Gravity | 0.6 | g/ml | - |
Regulatory & Compliance
- Chemical Inventories
Technical Details & Test Data
- Particle Distribution Map
- Softness Evaluation
Showing the result of compression strength test. The pressure is measured until the diameter is deformed by 10% for each particle of the sample. The smaller the number, the softer the particles. The result of flexibility is FS-400>CS-400>D-400>D-800 in order of softness. D-800 has higher-strength because the particle size is smaller.
- Flexibility Evaluation
Showing the result of the impact resilience test.This impact resilience was evaluated by measuring the compressibility and restoration rate when a test force of 9.8 mNwas applied to one particle of the sample. The particle diameter is 100%, the compression rate is the rate of particle deformation, and the recovery rate is the rate of particle size restoration. The equal the ratio of compressibility to restoration indicates that the powder has impact resilience. The graph is the value obtained by subtracting the restoration rate from the compression rate. From the graph, you can see that the impact resilience of FS-400 is high.
- Note
If urethane resin is added to a formula containing benzoates, the preservative effect tends to decrease, so it is recommended to use it in combination with other preservatives.